RES ART Stainless Exhaust Manifold Covers

[ResArt]

Small possibility but that will cost more as I dont have my advertising on them.

Any chance in avoiding all logos ?

If you mean you want a shield only for the the AC pump seperately that is a seperate thing and unless we have orders of again 20 its a no go sorry.

I'd be interested in a heat shield that covers the ac compressor on a 4g93t exhaust is alike close thus kills the over temp switch in them

 

[BZY247]

Lets get these rolling

Im all in for $100! ..... how soon can we have them made btw ?

 

[CLuTZ]

I am also keen for a plain one....

 

[EV0300]

Im not too keen on having holes in the shield, would it be possible to do the branding on a small plate and weld that onto the finished shield? Id be down for that

 

[Hyper_Mike]

Im not too keen on having holes in the shield, would it be possible to do the branding on a small plate and weld that onto the finished shield? Id be down for that

Thats along the same lines I was thinking, whatever is cheaper, no logo OR a logo on a plate so there are no holes in the HS.

 

[CLuTZ]

+3

 

[Ian91]

Can you do one for a 93t? Wouldn't mind paying a bit extra since its a different size.

 

[BZY247]

+3

+ 4

 

[4piknup]

He did say etched. To me that means like engraved on not laser cut lettering.

I will take 1 as well. If i can have no mounting holes please. I dont have a vr4 exhaust, so I will do the mounting holes myself. Cheers

 

[EVOCPE]

Put me down, I can always sell it later on down the track when I throw my bigger turbs on or I will make it fit the new manifold

 

[ResArt]

Branding on a small plate and welded on is a NO NO as it increases costs dramatically.
No Holes is possible But be aware What you get is is what you get no "oh I cant drill it I scratched" sort of excuses later please.
I am not meaning to be rude just covering bases is all.

Im not too keen on having holes in the shield, would it be possible to do the branding on a small plate and weld that onto the finished shield? Id be down for that

Correct me if I am wrong but I was under the impression the 93T was the same, if not please confirm as I will need to know if the no holes I plan to make can be made to retro fit it.

Can you do one for a 93t? Wouldn't mind paying a bit extra since its a different size.

Put me down, I can always sell it later on down the track when I throw my bigger turbs on or I will make it fit the new manifold

 

[ResArt]

Guys we have all these different requests for different things and I would love to meet all or your requests but you do realize that it is not possible to meet everyone's expectations.

First priority is to gather 20 orders once that is done, then we can discuss the different options we have.
If we get enough people that are willing to do the one design or idea then we can do that one different thing.

I can be contacted on 0422700701 if needed.

Cheers

 

[CLuTZ]

Branding on a small plate and welded on is a NO NO as it increases costs dramatically.
No Holes is possible But be aware What you get is is what you get no "oh I cant drill it I scratched" sort of excuses later please.
I am not meaning to be rude just covering bases is all.

I think they meant no holes as in, the holes that the RES ART logo makes. We will all obviously need the mounting holes pre-drilled so we can mount them!

The one thing I can see that differs from the late model shields is the need to mount the 02 sensor wire in 2 places on top of the manifold.

I will drop my stock heat shield off to you tomorrow- i'm still searching for a stock manifold though... If anyone has one in Melbourne I can pick up, please let me know. Even a stock, cracked VR4 paper weight manifold will be fine

 

[ResArt]

Dre Thanks for the clarification I was a little confused, the holes for the ResArt can be avoided and it will be etched out that was my plan.
The mounting holes will be there for you guys. When I see you in the next day or 2 we can discuss with some more detail.

Cheers

I think they meant no holes as in, the holes that the RES ART logo makes. We will all obviously need the mounting holes pre-drilled so we can mount them!

The one thing I can see that differs from the late model shields is the need to mount the 02 sensor wire in 2 places on top of the manifold.

I will drop my stock heat shield off to you tomorrow- i'm still searching for a stock manifold though... If anyone has one in Melbourne I can pick up, please let me know. Even a stock, cracked VR4 paper weight manifold will be fine

 

[EV0300]

Yeah thats all good was justaking suggestions, I just sold my stock manifold or I coulda dropped it off over the weekend. Whats the go if we cant get 20? Im very keen for a nice looking product to replace my rusting stocker

 

[Ian91]

Not sure if they are the same? If someone can confirm they are the same or can be modded to fit ill put my name in for one

 

[BZY247]

Lets just make these vr4 friendly shields. Custom orders can get another thread. I just want to get one asap and move on. If this is going to take months and months to finalise and produce im out.

Not to be rude, i just have no patience .... and see way too often forum interest threads take so long that people start loosing interest.

 

[CLuTZ]

I am the same- I need one ASAP, although I don't think this is the kind of thing that can be just produced overnight. Everyone is busy, and I know ResArt is too.

First of all, he needs an exhaust manifold and heat shield to work off and make the template. I am dropping off a stock heat shield to him tomorrow. I am away for a week so if anyone has a stock exhaust manifold they can lend, feel free to get in touch with either myself or ResArt

 

[bazeng]

I have a stock e3 manifold you can borrow.
Anybody who wants to buy it afterwards is welcome =).

 

[BZY247]

Guys i will happily send Res my stock heatshield... lets get more people on board for this or it will no go anywhere.