rvr 4g63t into gsr?

[Mister_Resister]

anyways i have got a rvr half cut that im wanting to put into a gsr shell
just wondering what parts i may need
what parts can i use

cheers in advance ben

 

[CLuTZ]

Hey mate,

Try doing a search- this has been covered so many times.....

http://www.4gtuner.com/index.php?/topic/2906-2lt-conversion-faqshelp-ideas/

 

[boostboy76]

From experience you'd at least need the passenger side driveshaft from a VR4 or Evo I/II/III (don't know if you can use an RVR one, maybe someone else does?), or failing that, one of these:

http://www.meek.com.au/index.php?act=viewProd&productId=338

You'll also need a 2 piece engine mount from an Evo III. Meek to the rescue again!

http://www.meek.com.au/index.php?act=viewProd&productId=327

http://www.meek.com.au/index.php?act=viewProd&productId=328

 

[Mister_Resister]

From experience you'd at least need the passenger side driveshaft from a VR4 or Evo I/II/III (don't know if you can use an RVR one, maybe someone else does?), or failing that, one of these:

http://www.meek.com.au/index.php?act=viewProd&productId=338

You'll also need a 2 piece engine mount from an Evo III. Meek to the rescue again!

http://www.meek.com.au/index.php?act=viewProd&productId=327

http://www.meek.com.au/index.php?act=viewProd&productId=328

thanks i found alot on the evo and vr4 swap but nothing on a rvr lol

any reason the left driveshaft is needed?

cheers ben

 

[3zercrowd]

Did you pick up that Half cut in Cairns?

 

[EVO-00X]

You'll get some info you need from this thread: http://evocoupe.net/forum/viewtopic.php?f=9&t=1639&st=0&sk=t&sd=a&hilit=rvr&start=45
The RVR engine was to replace a GSR engine and loom inside a turbo'd FWD coupe. Somethings you need to consider, others you'll already have available to you.

 

[Mister_Resister]

Did you pick up that Half cut in Cairns?

was thinking about it
but i dont have any way really to get it to brisbane lol
its well worth the price we talked about