RVR Inner Locating Hub diameter?

[dj_konix]

Heyyy,
trying to fit my bbs wheels and having no luck... anyone know the size in mm?

 

[DOUGMO]

cant you measure it?

 

[rexhunta]

67mm.

Mainly Falcon rims fit.

 

[ULS33-RVR-GO]

Need CBL rings for the mags? So do i!

 

[rexhunta]

i'd say he's trying to fit a skyline/supra rim on which is 58mm bore.

 

[ULS33-RVR-GO]

ahh yep that's probably it. And yes i can confirm that Falcon rims will fit RVR's with a 'slightly' more postive offest than factory specs. I don't recommend using them though cos it puts too much strain on the wheel bearings.... speaking from experience after having to replace my front wheel bearings because of it. Not a fun task let me tell you... It think RVR's use an offset of +38 or something? Can somebody confirm this?

Found these CBL rings if anybody needs to replace there's http://www.ebay.com.au/itm/Spigot-Rings-Hub-72-6-67-1-MITSUBISHI-EVO-3-4-5-6-7LANCER-GALANT-FTO-CARISMA-/130573628023?pt=UK_Cars_Parts_Vehicles_Wheels_tyre_Trims_Trims_ET&hash=item1e66cb7277#ht_1066wt_1139

 

[DOUGMO]

the rings wont help if the hole in the wheel is smaller?

you need spacers with a 67mm hole to space past the stock hub locator

 

[4piknup]

I would pull the hubs and machine the offending part down, if there was enough meat there. If not, machine the rims.