JPTRIPLEOG
Active Member
Hey guys, looking at changing from a top mount to a front mount & wondering what size FMIC would fit in? Cheers.
RVR SSG 94 FMIC
- Thread starter JPTRIPLEOG
- Start date
Help Support 4GTuner:
JPTRIPLEOG
Active Member
Also looking at performance exhausts, will evo 8/9 exhausts fit?
Benzo4gT
Operator
An IC from a HSG would be the measurements you need, I'm sure one of the guys will have the size on hand for you.
Regards exhausts, there is no "one size fits all" arrangement out there, you'll have to cut and shut a few bits from other systems or use new bends. IMO keep the stock one, save your $ and get a good 3" done at a later stage.
Can you weld? Because that will save you ton of $ in the long run.
Regards exhausts, there is no "one size fits all" arrangement out there, you'll have to cut and shut a few bits from other systems or use new bends. IMO keep the stock one, save your $ and get a good 3" done at a later stage.
Can you weld? Because that will save you ton of $ in the long run.
White Knight
Well-Known Member
+1^
There are a lot if crush bends in the RVR exhaust, be sure to get mandrel bends! And then go under the rear diff as well. Big props to benzo for teaching me how to weld as well!!!!! Saved me a mint.
There are a lot if crush bends in the RVR exhaust, be sure to get mandrel bends! And then go under the rear diff as well. Big props to benzo for teaching me how to weld as well!!!!! Saved me a mint.
MrConsistent
Well-Known Member
JPTRIPLEOG
Active Member
Changing from top mount to fmic.dimensions of fmic to fit into rvr ssg please?
White Knight
Well-Known Member
Smartarse. Lol.MrConsistent said:
tborvr
Well-Known Member
I fitted a 600×300 in mine with 2.5" piping
p055um5
Well-Known Member
sorry been away I have a hsg fmic is the shed will measure it tomorrow
p055um5
Well-Known Member
HSG fmic 590x260x70, contact me if you want a freebie, you pay postage.
edymadman7
Well-Known Member
p055um5, would you still be offering that fmic for cost of postage?
