selling my CB GSR 3 door lancer's

4GTuner

Help Support 4GTuner:

evo3hatch

Donating Members
Joined
Mar 17, 2010
Messages
20
Location
Redcliffe
Hi there guys, it's time to sell my CB GSR 3 door as I need my licence lol
and comes with another one with goodies

Both are 1990 white the colour full front end is due to minor acko with a ute ( brought it bent and fixed it )

1st one is " ozyVR4 " old car with a few more thing done
Stock j-spec 4g63t , not sure on k's but very good condition
replaced old stock cams with a perfect set I had spare
Updated hydraulic lifters ( 3mm hole)
Fantastic oil pressure ( 20psi on idle when hot)
A-spec intake manifold
New gates timing belt, tensioner , water pump and idlers 10k ago
New frond and rear main seals and cam seals 10k
Custom intercooler and piping with J-spec VR4 bov plum back
K&N filter in stock air can
Chrome exhaust manifold cover
Engine oil cooler
evo 3 full alloy radiator with aftermarket thermo fans
Sard AFRP with gauge
Chipped a-spec VR4 Ecu in lancer case so looks factory, have been running on 15psi . No knock. Chip done by - MY1DSMTUNING in the US.
Knock sensor only 9 months old
New exhaust gasket
NGK spark leads
Oil catch can
solid front and rear engine mounts
2.5 " exhaust, very quiet ( high flow cat, only 9 months old)
Koni yellows with king springs ( front shocks are buggered )
Palm logger
Aftermarket power windows
Dynamated front doors
Mongoose m80 alarm with cdl
T20 tinted windows
16x7.5 wheel with good tyres
Saas white faced boost & oil gauges with change colour, set to green to match fatory dash
Slotted rotors with new pads and painted calipers
Rebuilt rear calipers with new pads and slotted rotors
New inner and outer rack end and front wheel bearings ( both sides)
Engine is complied
Regd till feb 2015

Now the 2nd one is a gsr with sx interior and tail gate
one i did years ago sold it and brought it back lol
j-spec 4g63t had new head and gaskets done only did 20k on it be for turbo let go and has now sat for over 4 years
full 3 inch exhaust , fmic ( needs piping ), another td05 turbo, haltic ecu, king springs and more

asking 3500 for the first one and 1500 for the 2nd one or both for $4500 ono location is redcliffe nth brisbane 0437962925 Jeff
 

Attachments

  • IMG_0424-001.JPG
    IMG_0424-001.JPG
    169.2 KB
  • IMG_0423-001.JPG
    IMG_0423-001.JPG
    193.1 KB
  • IMG_0422-001.JPG
    IMG_0422-001.JPG
    141.2 KB
  • IMG_0421-001.JPG
    IMG_0421-001.JPG
    160.7 KB
  • IMG_0425-001.JPG
    IMG_0425-001.JPG
    121.2 KB
  • IMG_0426-001.JPG
    IMG_0426-001.JPG
    170 KB
  • IMG_0427-001.JPG
    IMG_0427-001.JPG
    159.5 KB
  • IMG_0429-001.JPG
    IMG_0429-001.JPG
    125.6 KB
  • IMG_0432-001.JPG
    IMG_0432-001.JPG
    120.6 KB
  • IMG_0430-001.JPG
    IMG_0430-001.JPG
    155.4 KB
  • IMG_0431-001.JPG
    IMG_0431-001.JPG
    128.6 KB
  • IMG_0436-001.JPG
    IMG_0436-001.JPG
    138.9 KB
  • IMG_0433-001.JPG
    IMG_0433-001.JPG
    145.9 KB
  • IMG_0438-001.JPG
    IMG_0438-001.JPG
    128.4 KB
Back
Top