single board ecu, chipped

[xjokux]

Thought I would ask a few questions before posting a wanted ad bout getting a single board ecu.

Any single board vr4 will work with vr4 motor?

I've got a 055 maf as well, which i'll need to chip it to compensate it. What's the go and where to get it done?

cheers
johno

 

[rob323]

What ecu is in there at the moment?
Which wiring loom are you using?

 

[xjokux]

i've got a double board ecu using a vr4 engine loom

 

[rob323]

One option is to find an A spec vr4 ecu, have it socketed and chipped, swap pins 6 and 14 around on the wiring harness and away you go. If you get a key diver chip, he might be able to program it so you can retain the cyclone butterfly actuation.

Another option is that some people have claimed to be able to chip the dual board ecu.

 

[MDK87]

You can't datalog dual board ECU's hey?

Here's the chipped dual board.

http://www.galantvr4.org.au/public/...8&p=85538&hilit=chipped+dual+board+ecu#p85538

 

[xjokux]

hmm.. I would like to datalog it tho.

But in the long run is it better to get single board? easier, more simple and well known circuit board?