Turbo 4 a 2.3 stroker

[OLDIE]

Who has any first hand info on which T3 Twin Scroll turbo would be best to give 400 hp at the wheels and still be very responsive BUT not be an all or nothing job

Would love a BW EFR. but way out of my budget.

ATM am considering a GT3076R with a 83/4 ? turbine housing.


PS need to get info from the horses mouth and not the other end

 

[vr401]

I am getting GTPumps 762 turbo. Very good for 2.3 stroker.

 

[ENGINR]

Am running a GTX3076R with the 0.82 single scroll housing on my 2.3 making 400hp atw and it's great on the track. I am changing to a 0.83 twin scroll soon to help improve the response around some of the tighter bits of the track where the rpm drop a bit

 

[EVO-00X]

I've got a 2 litre making 330kw atw on 28psi boost on 98 pump fuel, so on a stroker you should be able to make much more on E85 and get useable boost much sooner.
A mate with a GTX3076R on his 2.3 stroker was making...... (see attached screenshot with rpm levels and figures).

 

[OLDIE]

Thanks guys .I have the car 4 sale ATM and if it doesn't sell then there will be 1000cc's Injectors replacing the 650's and a GTX3076 + a retune coming

 

[howell]

I have had very good results using an 8-blade Holset HX35 with my 2.4L. I didn't use the twinscroll hot side...just had an open T3 .63a/r turbine housing machined out to accept the Holset turbine wheel. This was to use my existing cast open T3 manifold and 5-bolt o2 housing and DP.

24psi by 4000rpm. Even faster after switching to 272/272 cams, which I feel are the minimum for a 2.3/2.4L. Idles like stock.

Twinscroll will only make all of that happen faster.

 

[evo-gsr]

Holset FTW.
Love mine.

 

[bazeng]

Gt3082 was gold in my 2.3 and 3.9 Gearbox. 350kw on bp98. 30psi.

Sent from my LG-D802T using Tapatalk

 

[evo-gsr]

And I will say it again....
HOLSET FTW!!

 

[Cranked]

Garret ftw. Ball bearing

 

[blu3gsR]

86hta. FP. Pretty handy turbo. 320kw on 25lbs