[VIC] Evo garage sale - Post build

[TMAK]

Evo garage sale.
After my recent engine build, I decided to have a garage clean up and here's what's available. I may add more items to this:

FS: Evo 4-6 LED tail lights in very good condition. Used once for one outing and blew my motor.
These lights will literally blow you away and will make you run 11's. (disclaimer: may or may not be true).
$222.22 ONO posted aust wide



Unused new parts:
- HKS type 0 TT with harness to suit Evo 1-6. SOLD
- Billet cam sensor cover SOLD
- Apexi TT $30
- Brembo stickers from meek SOLD
- Endless SSS front pads $200
- Bendix general CT rear pads $60
- Cosworth oil scraper $90
- Gates balance shaft belt $50



Used standard parts:
4G64 crank. Has some marks but nothing a machinist can't fix. This survived my blown motor which was built by MAP. $150
CP9A Evo 6 clutch with flywheel good used condition. $50
CP9A Evo 6 rear hubs in good condition. $150 pair
CP9A Evo 6 oil cooler with lines $150
CP9A Evo 6 TME black centre cap (single). MR510378. $20.
CP9A Evo 6 Headlights with clearn indicators in good condition. $200
CP9A standard intercooler piping. All hoses, maybe missing some hose clamps. $50
CP9A Evo 6 TME camshafts. Good to remove lumpiness from aftermarket cams. Lol. $50
CE Lancer bootlid in silver. $50

CT9A Evo 8 front hubs. Will need new wheel studs. Good for RA brembo upgrade. $100 pair.
CT9A stock dump $5
CT9A stock front pipe $5
CT9A GTA stock intake rubber pipe $5
CT9A centre caps off Evo 7 gsr. SOLD
CT9A indicator/wiper stalk. $80
CT9A Evo 7/8 plazmaman hotside pipe LICP. $150
CT9A standard Evo 8 struts and springs. Missing top bolts as used on coilovers. $80
CT9A Evo 7 GTA camshafts. Good for fuel economy. Lol. $50 pair
CT9A EGR block off plate. $20
CT9A HID ballasts. $200 pair.
CT9A Evo 8 USDM tail lights in great condition. $300
CT9A Evo 7 tail lights. SOLD


Aftermarket:
CT9A catback custom exhaust based of Apexi, with varex tip to suit 7/8 bumper. $250
Samco red silicone hose with temp sensor adaptor to suit CT9A. $80
4g63 Cam gears in blue. Unknown brand. SOLD
CT9A aftermarket intercooler piping. I lost the hoses and clamps. Generic piping off ebay to suit non-standard intercooler. $150.
Brand new depo clear tail lights. These are identical to the Evo 8 usdm. Purchased to paint black but never got around to it. $300.


Misc Mitsubishi:
Evo 123 fibreglass bonnet vents. SOLD
FTO front hubs with used discs and new RDA slotted rotors. Was going to make the daily CE 5 stud. $300.
Steering wheel with boss kit to suit CE lancer/mirage. $50

If it's not listed, I may have it so just ask as I have 2 Evo's here: my TME and my GF's GT-A.
Prefer parts to be picked up in Hillside, Victoria (3037) or where listed shipping prices associated.
I can arrange a courier for interstate buyers, but will require more time to pack and organise unless you arrange your own courier I will be happy to assist in packaging.

Regards,
Tim

 

[evo-gsr]

Few bargains, should move quick!

 

[BYBY5L]

Wat up timmy, still need to catch up with ya to give ya 50 bux which youve probably forgotten about, lol

ill grab the std dump off ya too, are ya gunna come down to the meet? Or are ya heading past jays at any stage?

 

[evopwr]

Hey tim! Does the scraper suit evo1-3??

 

[TMAK]

BYBY5L: Jamie, yeah man I forgot. I'll go to the meet or hit you up if I'm in the area. The dump comes with a stubborn o2 sensor and maybe some spiders .

evopwr: Alex, I bought both cosworth and tomei crank scrapers and chose to use the tomei coz more bling. Lol
I found this from google from a US site: "This item is designed to work with the 2.0l 4G63. This item may need slight clearancing to work with a 2.3l "stroker motor".
Works with 2G Turbo DSM's and EVO IV-IX's."

 

[evopwr]

feeehkk just checked em out online and yeh tomei is way more bling than cosworth haha

Just need to find out from someone if the bottom end is the same fitment as e1-3. I am suspecting not =(

 

[4piknup]

Should fit all 7 bolt engines. Wont fit a 6 bolt. So evo1-3 will fit. Afaik

 

[BYBY5L]

Yeah it kinda slipped my mind as well man, as for the spiders... you can keep em, im sure you know us kiwi folk have issues with spiders, lol

And alex, im 99% sure theyre the same, I have a cosworth 1 in my 63 im building and didnt specify the year

 

[3zercrowd]

Wat up timmy, still need to catch up with ya to give ya 50 bux which youve probably forgotten about, lol

ill grab the std dump off ya too, are ya gunna come down to the meet? Or are ya heading past jays at any stage?

Dude! You should grab the hubs off him and go 5 stud! Just need to find the rears then!
You can use the GTO rotors after that :thumbsup:

 

[BYBY5L]

Doesnt matter now, dont have the car, and I already had all the 5 stud hubs, just wanst in a hurry to go changing over when I didnt have wheels