VR4 airbox

[265T]

i want to make an airbox for my VR4 , the battery is now in the boot

can people post up some pics of the different types of airbox setups they have

it would also be greatly appreciated if someone had some measurements & detailed pics

Thanks
Paul

 

[crossam]

i am currently looking at getting something made up in aluminium, trying to narrow down a fabricator to do the work

 

[265T]

do you have a design or measurements yet?

i'm looking at doing it in mild steel

 

[Entaran]

paging troy...

 

[VR-4Squid]

I'm going with a sheet from the radiator to the strut tower, and another for a lid, sealing off that whole area, much simpler than making a complete box.

Air will be ducted up from the hole where the stock spotlight was, and through the headlight hole when racing.

 

[WRCVR4]

paging troy...

YEA WHAT - soz bad day

 

[bazeng]

heres mine

basically depending on your intake pipe and air filter..
its not going to be identicle to others

what intake and filter do you have?

 

[crossam]

baz thats exactly what i am looking to do
can you get some more photos/info for me.

 

[265T]

what intake and filter do you have?

just running standard intake with a K&N filter

thanks for the pic, would it be possible to get some more detailed shots, please

btw whats the big shiny PWR thingo???

 

[GVR40]

correct me if i'm wrong but that is a PWR water to air intercooler

 

[JayRome]

i believe it does look like one GVR40.......

 

[GVR40]

what intake and filter do you have?

just running standard intake with a K&N filter

thanks for the pic, would it be possible to get some more detailed shots, please

btw whats the big shiny PWR thingo???

put an 055 or 609 AFM on it off a magna or evo and you can put a better and bigger filter on it

 

[265T]

so where do you guys pipe the air from in the bar

the J spec bar only has a small vent hole in it :?

 

[WRCVR4]

so where do you guys pipe the air from in the bar

the J spec bar only has a small vent hole in it :?

Mine just come trough the headlight + the bung in that area is removed to allow air from under it to be sucked in

 

[3zercrowd]

paging troy...

YEA WHAT - soz bad day

Troy.

How are those bolts and nuts anchored to the lid?(underneath i mean)
You cant put a spanner underneath to hold the bolt in place so it doesnt spin around while the lids on. See my point?

Got a picture of the box with the lid open/off?

Im in the process of making a box now and im putting a lid on it and I need to know :wink:

 

[JayRome]

tack weld the nut to the bracket....... not hard.....

 

[265T]

or use nutserts

 

[JayRome]

or use thick metal brackets and Tap a thred into them.......

 

[3zercrowd]

tack weld the nut to the bracket....... not hard.....

LOL its Aluminium....all of it.

or use nutserts

What the? :lol:

 

[265T]

or use nutserts

What the? :lol:

it's like a pop rivet with a thread in the middle