vr4 conversion into CB GSR
- Thread starter RicKii``
- Start date
Help Support 4GTuner:
4piknup
master of none
What/where did you measure? I will measure mine for you.
So you have 106 teeth on both flywheels? I thought the na flywheel had 110 teeth.
So you have 106 teeth on both flywheels? I thought the na flywheel had 110 teeth.
Marc
Pre Staged
I'll count both my flywheels tomorrow, have both fwd and awd.
4piknup
master of none
My sonata 2.0 twincam circa 1995 has 110 teeth. It is 890mm circumference at out side of teeth.
4piknup
master of none
I also have a fidanza 6 bolt awd flywheel. It has 106 teeth. It is 855mm around outside of teeth.
So my sonata wheel is 12 mm bigger diameter or will have its teeth 6mm closer to the starter.
Fwiw
So my sonata wheel is 12 mm bigger diameter or will have its teeth 6mm closer to the starter.
Fwiw
4piknup
master of none
The awd wheel is diameter 272mm (855mm÷3.14)
And sonata is 283mm (890mm÷3.14).
You said your 2 wheels are 270mm (pretty close to 272) so the sonata one is bigger.
Go get a sonata one or make me a offer for mine and for solving all your problems.
Or like everyone of my 5307 posts so I have more rep points than jamo.
And sonata is 283mm (890mm÷3.14).
You said your 2 wheels are 270mm (pretty close to 272) so the sonata one is bigger.
Go get a sonata one or make me a offer for mine and for solving all your problems.
Or like everyone of my 5307 posts so I have more rep points than jamo.
Marc
Pre Staged
Got the tape measure out ran it over my two here.
Now i forgot, but my AWD one isnt VR4 or Evo, it's CB AWD Cyborg.
Both are 272mm dia with 106 teeth, only difference being the FWD has 200mm clutch plate and AWD being 225mm.
CB FWD on the left, and CB AWD on the right.
I also checked out the starter motors to see if there is any difference between the two and there was not.
Just realizing this info may/may not be helpful.
Now i forgot, but my AWD one isnt VR4 or Evo, it's CB AWD Cyborg.
Both are 272mm dia with 106 teeth, only difference being the FWD has 200mm clutch plate and AWD being 225mm.
CB FWD on the left, and CB AWD on the right.
I also checked out the starter motors to see if there is any difference between the two and there was not.
Just realizing this info may/may not be helpful.
4piknup
master of none
Thanks marc for having a look. I think you and speedy have the same wheels and I have the correct one for the op problem. I would say mine here has the 225mm clutch plate too (but I havent removed it to see)
It seems your cb awd wheel is functionally the same as a vr4 wheel or my fidanza will only fit a cyborg....
It seems your cb awd wheel is functionally the same as a vr4 wheel or my fidanza will only fit a cyborg....
Marc
Pre Staged
I'm not entirely sure on if the CB AWD one and the VR4 are interchangeable units??
But one thing i did notice when measuring them up is when they are both sitting on the bench, how different the placing of the ring gear was, but upon closer inspection and measuring from the back, there is only 1mm difference (better known as fuck all in metric), between the face of the crank, and the placement of the ring gear.
But one thing i did notice when measuring them up is when they are both sitting on the bench, how different the placing of the ring gear was, but upon closer inspection and measuring from the back, there is only 1mm difference (better known as fuck all in metric), between the face of the crank, and the placement of the ring gear.
4piknup
master of none
I like rum and collect $100 bills.
Pm me offer. Located perth.
Maybe someone is wrecking one in gumtree near you
Pm me offer. Located perth.
Maybe someone is wrecking one in gumtree near you
Marc
Pre Staged
Mikey (evocpe) has a cb gsr flywheel for sale same dude.
Marc
Pre Staged
When I mentioned I was/am using a cb gsr box I'm talking the 1.6l dohc n/a fwd not gsr as in awd.
Marc
Pre Staged
No no the cb gsr is fwd use their flywheel that's what I'm using on my vr4 motor with a cb gsr 1.6l gearbox
yes very true .but i have a hyundia gearbox bellhousing bigger so need sonata
The awd wheel is diameter 272mm (855mm÷3.14)
And sonata is 283mm (890mm÷3.14).
very confusion lol bought this car as project but is doing my head in :fuuuuu: if anybody could help me out with a gearbox to suit VR4 motor and FWD ???
The awd wheel is diameter 272mm (855mm÷3.14)
And sonata is 283mm (890mm÷3.14).
very confusion lol bought this car as project but is doing my head in :fuuuuu: if anybody could help me out with a gearbox to suit VR4 motor and FWD ???
Marc
Pre Staged
Like I said dude, in my old cc lancer I used to use a sonata flywheel and a Cc glxi gearbox, gear ratios were awesome, but they were weak as piss.
With the cb used just the cb gsr flywheel and gearbox, ratios are a tad shorter (3650rpm@110kph) but with ratios being so short it just wheel spins.
With the excel I'm currently using the same setup as above, but I did get a lantra gearbox in it but I had issues with the shifter setup and just found it was easier to put the cb box back in to get it on the road asap. Will revisit this later as my shifter said I was selecting 1st, 2nd, 3rd and 4th but I was selecting 3rd, 4th, 5th and reverse. But I was also using a cb gsr flywheel as well.
But when I attempted to use the Hyundai box, I forgot to change that small plate between the box and the engine as found out the starter was in a slightly different location, changed that and made it all blend.
Hope this helps but it's hard to write a essay on a phone
With the cb used just the cb gsr flywheel and gearbox, ratios are a tad shorter (3650rpm@110kph) but with ratios being so short it just wheel spins.
With the excel I'm currently using the same setup as above, but I did get a lantra gearbox in it but I had issues with the shifter setup and just found it was easier to put the cb box back in to get it on the road asap. Will revisit this later as my shifter said I was selecting 1st, 2nd, 3rd and 4th but I was selecting 3rd, 4th, 5th and reverse. But I was also using a cb gsr flywheel as well.
But when I attempted to use the Hyundai box, I forgot to change that small plate between the box and the engine as found out the starter was in a slightly different location, changed that and made it all blend.
Hope this helps but it's hard to write a essay on a phone
