Water temps...?

[tharaka]

does anybody know the temp the fans kick in?

the wolf is not controlling the fan, as they run independantly with its own sensors...

can you hear it pinging top end?
if it is, get it checked out with dan,
get some timing pulled out if it is pinging, richen it up...

nah, dan said thats why he couldn't add more timing, because it was detonating, so he had to pull it back

also
can you think of any reason why my fans dont work? (interior/aircon/heater)

 

[JayRome]

Thermo switch is old or the relay for it is on the way out.......

 

[tharaka]

Thermo switch is old or the relay for it is on the way out.......

nah
it was working before the wolf went in lol

 

[JayRome]

change the Relay for the Fans, contacts could have carbon build up on em.....

 

[brisvr4]

The engine fan should turn on at around 93 or so.
The secondary fan comes on at about 102 from memory.

 

[bazeng]

thanks brisvr4,
so temps are okay... not too far off

as for a/c fans.
could be a fuse or a plug,
gimme a look and ill fix it for ya..

 

[AUSVR4]

Have a good look at the fan speed sensors bolted to each fan. If the wiring has been pulled or the metal prongs bent (or even if the things have just crapped out) the fan will not switch on.

Either could have been damaged when the work was being done