what about this cooler?

[matress]

hey guys,
after searching ebay, i found this cooler aswell...
http://cgi.ebay.com.au/Large-FMIC-T...619841749QQcategoryZ43808QQrdZ1QQcmdZViewItem
what do you reckon?
Mat

 

[matress]

or there's this one:
http://cgi.ebay.com.au/ws/eBayISAPI...sPageName=MERC_VI_ReBay_Pr4_PcY_BIN_Stores_IT
this one is tube and fin whereas the other is bar and plate

 

[tharaka]

they're all just offcuts of truck cores arent they?

im sure just a standard jspec cooler would flow better than them

 

[matress]

im not sure
the cooler i have at the moment is a chopped down truck core.
one of the coolers says 600 cubic feet/min and max 400-500hp, the other one is 400 cubic feet/min and max 600hp.
anyone care to explain? :?

 

[tharaka]

im not sure
the cooler i have at the moment is a chopped down truck core.
one of the coolers says 600 cubic feet/min and max 400-500hp, the other one is 400 cubic feet/min and max 600hp.
anyone care to explain? :?

one flows better, one cools better - i think

 

[GSRSOL]

youd be better off with a mitsu evo cooler IMO.... or if you can extend the budget, an ARE one -> either the 520or600mmx270mmx75mm core ones in wahtever you prefer of B&P or T&F.

$219 is really really cheap - to good to be true? :?

 

[matress]

the ARE ones are out of my price range altogether and I can't seem to find an Evo one.

 

[bazeng]

get a pwr one mate

600x250x73mm

 

[matress]

or how about this?
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=4619932275&rd=1&sspagename=STRK:MEWA:IT&rd=1

 

[tharaka]

or how about this?
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=4619932275&rd=1&sspagename=STRK:MEWA:IT&rd=1

0 feedback
ask him what the height is

 

[matress]

yeah, i noticed the feedback thing.
it'd 270mm high.


i also went down to autobarn for a look, they have a tube and fin cooler, 560x230x60 with 2.5 inch inlet and outlet.
nicely shaped end tanks too, im just wondering if 60mm is too thin?