What's the max boost can u run on a rvr 4g63

[Koko08]

How do I up load photos on here??? Some pictures of my engine bay

 

[Koko08]

Just realize y the car fast coz my rocket cover is painted pink :b

 

[4piknup]

just realized why you wont post pics, the rocker cover is pink! rofl

'use full editor' when you reply and add pics through there

 

[Koko08]

ill take some beter ones when i get the car back

 

[something_wild]

Wow, standard top mount.
300kw is starting to sound a little optimistic now.....

 

[Koko08]

It got a frount mount now that's old

 

[dj_konix]

were these photos when the old owner had it?

 

[Koko08]

Nah I took these about 3weeks ago I had to put all stock parts on for RWC but I still can't get a hold of the stock airbox . I'm changing from qweensland plates to Vic that y I need rwc

 

[something_wild]

I can't keep up lol....

Take it to Springy performance in springvale, good honest guys that know 4g's very well and have a dyno....they should be able to tell you almost all you'd like to know ;-)

 

[Koko08]

Thanks guys

 

[chariotgthk]

Guys all of you running Manual gearbox?
I did buy a TD05 16G but was taken off my car before I set out for test run
The current TD04-15 turbo is not giving me enough acceleration after 4Krpm so I do rillly wanna try Td05
Since mine is AT still not yet decide how much boost I can run with that turbo
Scared to break the gearbox since it is so hard to find replacement parts
Any ideas?
Thanks

 

[Koko08]

My point of view of the td05-16 14-16psi is plenty my old rvr in nz was auto with a tdo5-16g I ran fine at 14psi. It pulled pretty hard but 1-2 years later the trans started slipping and had no overdrive gear so I would chuck a trans cooler on if ur chariot had the same stupid auto box they put in them rvr

 

[chariotgthk]

I install an ATF cooler for my car but before that I want to look for the best racing ATF for the gearbox
Any recommendations?

Anything like this is gd?
http://www.torcousa.com/torco_product/atf.html

Thanks man

 

[Koko08]

I'm not saying to listen to me I'm just telling you my experience with my old rvr but be cautious with them auto trans because I went thro 3 and it's pretty common that they slip or lose a gear or 2 due to overheating probs that what I was told

 

[Koko08]

I would take it to get a trans service and make sure everything right the last thing you need is to blow it due to more torque I'm not sure what oil to use tho. And yea I have a Manuel trans