Wrecking lancer GSR cc

4GTuner

Help Support 4GTuner:

S

slow ute

Well-Known Member
Joined
Feb 13, 2010
Messages
149
Location
Townsville
I am wrecking a GSR.
Location Townsville. Freight is cheap for smaller bits
Paint code BB
Trim code. X1

It's probably easier to list the parts I don't have.
Motor (do have a 4G63 for sale soon)
Gearbox
Transfer
Computer
Computer loom
Speedo


Parts of interest

Front seats. On hold
Rears seats. On hold
Rear diff centre
Most panels are good apart from a few bangs here and there. Drivers door has a largish ding at the top. Bonnet good and has a small mark. In it
Roof sold I think
All glass

If there is anything u need in particular. Let me know.

My sale deal is this. I will charge $50/ hr to remove anything. If it take 15 mins + 15 to drive to post office. I will charge u $25 plus freight. If it takes me an hr to pack it. U can pay for that. Lol

If it takes me 5 hrs. Its gonna hurt u.

Pics tomorrow as I get it pulled apart

Cheers
 
slow ute said:
I am wrecking a GSR. Location Townsville. Freight is cheap for smaller bits Paint code BB Trim code. X1 It's probably easier to list the parts I don't have. Motor (do have a 4G63 for sale soon) Gearbox Transfer Computer Computer loom Speedo Parts of interest Front seats. On hold Rears seats. On hold Rear diff centre Most panels are good apart from a few bangs here and there. Drivers door has a largish ding at the top. Bonnet good and has a small mark. In it Roof sold I think All glass If there is anything u need in particular. Let me know. My sale deal is this. I will charge $50/ hr to remove anything. If it take 15 mins + 15 to drive to post office. I will charge u $25 plus freight. If it takes me an hr to pack it. U can pay for that. Lol If it takes me 5 hrs. Its gonna hurt u. Pics tomorrow as I get it pulled apart Cheers
Click to expand...
Do you still have the stock manifold if so how much to send it down to sydney? And just confirm the engine is a 4g93t
 
Do you have steering wheel surround?? I'm really only after the lower part but will happily buy both if in good condition
 
Adrian.

Yeah I do but it has 2 holes in it from the cruise control. They are on the left side. 1 is about 10mm the other is about 4mm

Do u know Doo Doo aka Andrew. I have a crate heading his way next week. Will chuck it in there if u want.

If any other brissy guys know him and want small things. I can chuck them in and save u freight, if he is happy to do that.
 
Yup that sounds good. Is it black and where the thing surrounds the ignition barrel is that facing the steering wheel or on the side pointing in towards the steering rack? Can you let me know how much u want and some details etc. pm me if that's sweet
 
Like mick said, happy for stuff sent to Brissy to be thrown in with the engine he's sending down, pm me if you need to.
 
doo doo said:
Like mick said, happy for stuff sent to Brissy to be thrown in with the engine he's sending down, pm me if you need to.
Click to expand...
Hi doo doo, might be nice if you put up a introduction thread to introduce yourself and say hi!

maybe a members rides too?


Cheers
 
Evening Fella's. I'm in need of the rear door cards and all of the plastic door sills if possible? Oh and what condition is your boot carpet and plastic trims in?..Am i to late for this come on the same trips as Doo Doo's? Cheers
 
Will look tomorrow for u. I think the boot carpet is ok. Door cards should be ok. No scuff plates. All gone. Boot plastic I think is a lovely shad of blue lol

Doo Doo stuff should go Monday or Wednesday. Just waiting for him to get back. Door cards will be a little big for the box but I don't think they will cost much if Ur in brissy. Only costing $120 for a whole motor.
 
ULS33-RVR-GO said:
Evening Fella's. I'm in need of the rear door cards and all of the plastic door sills if possible? Oh and what condition is your boot carpet and plastic trims in?..Am i to late for this come on the same trips as Doo Doo's? Cheers
Click to expand...

Left card. Good condition
Right card has a slight mark on it. Like someone stabbed it with a pen. Send me Ur mob and I will text u a pic. $80
The only boot trim is the one where the latch is. Unless u mean the ones that go around the hole behind the rear seat. The boot latch one is painted blue but is pretty flakey so I will see if I can get the paint off. If it comes up ok. $10?

I have all the trim plastics except the sill ones

Boot carpet is average at best. Free If u buy the rest as I don't even think its the original.


Cheers
 
Bits left on the car

Front struts only.
Kings. KCFL for GSR with kyb shocks. Shockies seam to be ok. Pass the bounce test $100

Rear diff centre.
Stocko GSR. Has a bit of back lash but appears ok. $ 130

Front seats
Stocko GSR. Good nic. Just need a clean $150
Have the rears as well but the stitching is buggered and a small tear in 1 bottom. U can have them if u take the fronts.

Standard front and rear calipers and front sloted discs. $50

Instrument cluster..cracked front plastic. $20

Front door cards are good nic $80

Rear door cards for sale after RVR dude gives me a answer

Front drivers head light $30

Rear tail lights pair. Will double check $30

Almost full air con system. Compressor. Condenser and evaporator. Was working but no gas in it now. Missing 2 pipes. $150.

Will think of more on the weekend.

Make me offers.
 

Similar threads

F
Jumbuck 4g93t swap HELP!
Replies
0
Views
3K
fado5
F
Sulusi Eteru
URGENT SALE - "DAILY DRIVER" 1994 CC Lancer GSR with 4g63t conversion
Replies
0
Views
3K
Sulusi Eteru
Sulusi Eteru
S
Parting Out Mitsubishi GSR
Replies
16
Views
2K
omar.estwick
O
I
83/84 KE70 corolla
Replies
2
Views
1K
Ian91
I
CLuTZ
F.S: '88 GSR 4WD Rolling Body [VIC]
Replies
4
Views
2K
DVSKIWI
DVSKIWI

Latest posts

Back
Top