WTB: Camshafts HKS 264 or stock E3's

[Dr RVR]

Wanted: Camshafts HKS 264 or stock E3's

Item Info: Chasing inlet and exhaust camshafts for a 63T head rebuild. Looking for either genuine Evo 3's or a set of HKS 264's(a long shot but worth asking).

Contact Details: Pm us is preferable

Other: Can arrange for pickup in Brisbane/Gold Coast area or Perth, otherwise will need to be willing to post to us.

 

[Dean]

Not sure if price etc suits you, but I stumbled across these HKS 264's the other day on US Ebay:
http://cgi.ebay.com/ebaymotors/HKS-...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[milkandoj]

I have stock vr4 cams, they are meant to be the same as evo 2-3. evo 1 cams are meant to be the ones with less lift.
I'm in Perth to if you want to come for a look.
I ran my finger over them when taken out of the car and no grooves or ridges on the lobes.
Motor had done 75K when i took them out less than a yr ago.

 

[to4garret]

Also,

Dr RVR, if you have a HSG that uses the CAS on the gearbox side of the engine, you need to be very careful what cams you get as the stock inlet cam has a threaded section for the CAS, which i havent seen on any other VR4/E1-3.

We ended up having to put the cam onto a lathe and thread the inlet cam on a mates HSG.

 

[FRANK-E]

iv got sum evo cams if your interested shoot me a pm

 

[LWNSLW]

evo00x has some vr4 rs cams too they are the same as evo 2/3 i think...

 

[EVO-00X]

I thought you were going to buy mine Chase

 

[Dr RVR]

Thanks for the response guys and the little extra info. I have contacted two of you thus far, Frank-E will let you know if the other two options fall through as I can view the others due to their locations. Thanks

 

[mymidlifecrisis]

Well if all else fails, I've got a stock set of e3 cams here.

Dean