WTB Evo 7 GTA 4g63 sump pan

[philsth]

Hi looks like I need a sump that will fit a 63 in an evo7. When putting the sump bolt back in it tightened then just started spinning I think the thread plate is spinning in the sump. Haven't got the sump off so I don't know if it can be fixed or if the whole sump will need replacing.

Thanks
Phil

 

[philsth]

A pan off any evo from 4 to 7 will work even an 8 or 9 will work if I change the turbo oil return line I believe.
Thanks.

 

[moonchook]

would an rvr sump suit? have one from a 7 bolt HSGR rvr motor.

 

[4piknup]

I dont think so chook. Its a wide block vs narrow block and the engine is other way around. Surely the turbo drain is on wrong side.

Id just fix the one you have phil. You have to take it off now anyway..

 

[philsth]

would an rvr sump suit? have one from a 7 bolt HSGR rvr motor.

Sent you a PM

Might use the threaded bit

 

[evo-gsr]

Tried EvoOz ?

 

[philsth]

Tried EvoOz ?

Got an add on there too
Thanks

 

[evo-gsr]

Good luck.

 

[philsth]

Good luck.

Fixed. Had a threaded oxy sensor bung welded on , now Has an 18 mm plug.

Thanks all

 

[evo-gsr]

Good stuff