WTB Rear Disc Brake Caliper Mounting Arm Bracket CC GSR

[Muzz66]

I am looking for a pair of Rear Disc Brake Caliper Mounting Arm Bracket only of a CC GSR.I need to be able to bolt straight on to a cc coupe to finish my conversion.If they aren't a straight bolt on I will need to make some custom brackets.Or machine my discs down to 250mm which I really don't wont to do.The CB GSR brackets I have a about 5 to 6 mm off.I have 260mm rotors the same as CC but with the CB offset.Just machined down a set of CB rotors.The CC calipers I have are for 260mm rotors.

 

[DOUGMO]

i have one here i can take a pic of if you want?

to make sure they will fit

 

[Muzz66]

i have one here i can take a pic of if you want?

to make sure they will fit

That might be a help.Do you have a pair you want to sell.

 

[DOUGMO]

no

only a spare bracket from a spare caliper sorry mate

 

[DOUGMO]

here you go mate

 

[Muzz66]

LOL no mate the bracket the caliper itself bolts to.The one that bolts to the hub.Thanx for the effort anyway dude.

 

[DOUGMO]

that is bracket that the caliper goes onto,slips onto the 2 bolts on that bracket mate.

the holes are where it bolts to the trailing arm.

 

[Muzz66]

that is bracket that the caliper goes onto,slips onto the 2 bolts on that bracket mate.

the holes are where it bolts to the trailing arm.

I dont think it bolts straight to trailing arm but rather to a bracket but I could be wrong.Check the pic here of the trailing arms and the bracket I am refering to bolts to the four holes around the stub axle on the coupe trailing arm and around the hub of the awd trailing arm.
http://www.evocoupe.net/forum/viewtopic.php?t=3897&highlight=

 

[Liberoz]

He's after the caliper mounting arm bracket
I have a pair but am selling with compleate gsr rear disk brake set up and hand brake cables.

 

[Muzz66]

He's after the caliper mounting arm bracket
I have a pair but am selling with compleate gsr rear disk brake set up and hand brake cables.

I have everything bar the brackets :cry:

 

[BMGTZ]

He's after the caliper mounting arm bracket
I have a pair but am selling with compleate gsr rear disk brake set up and hand brake cables.

I have everything bar the brackets :cry:

I have them but they are in Perth

brian

 

[Muzz66]

He's after the caliper mounting arm bracket
I have a pair but am selling with compleate gsr rear disk brake set up and hand brake cables.

I have everything bar the brackets :cry:

I have them but they are in Perth

brian

Give me a price and I will work out postage

 

[BMGTZ]

IGive me a price and I will work out postage [/quote]

gotta take them apart which will probably stuff the bearing..also I dont have a press so will have to pay for that..so make me a good offer......pm me if you like..they arent that big so post would not be too bad


bmgtz

 

[Muzz66]

IGive me a price and I will work out postage

gotta take them apart which will probably stuff the bearing..also I dont have a press so will have to pay for that..so make me a good offer......pm me if you like..they arent that big so post would not be too bad


bmgtz[/quote]
Lets not butcher it yet still looking

 

[Muzz66]

still looking :cry: