WTB - RVR ECU hypergear

[JETGSR]

As topic suggests

want to buy ECU for RVR hypergear

not sure if they are all the same, this RVR has the crank angle sensor
not the normal CAS like an E I II III/VR4

or can I use an E2 ECU and just fit a CAS and adjust the wiring

want the simplest options

NO GOLD PLATED ECU's please just the standard ones (they are cheaper)

 

[Our_Town_Auto]

I have the original ecu out of my Hyper Sports Gear. Any help? Not sure...

 

[JETGSR]

thats what im looking for? is it a manual? ie 5 speed

not sure if that makes a difference. but mines a manual

how much were you wanting for it?

 

[dj_konix]

you still need an ecu?

 

[penngwyne]

As topic suggests

want to buy ECU for RVR hypergear

not sure if they are all the same, this RVR has the crank angle sensor
not the normal CAS like an E I II III/VR4

2000/4WD/WIDE
Hyper Sports Gear R (4WD/DOHC/TURBO)

The ECU for an N23WG SRHF with the 4 speed auto is MD344537

The ECU for an N23WG SNHF with 5 speed manual is MD340778

I have an ECU available for $200 which is the MD340778 which is not off mine but came from QIK-247
If you don't want it I will send it back to him.

My HSGR is fitted with a crank angle sensor which is at the rear left side of the motor down low under the timing belt cover (Hard to get at.)
It also has a Camshaft position sensor high on the rear right hand side of the motor.(Easy to get at.)

Other versions of RVR have different ECU but these are the only ones for HSGR N23WG according to the Mitsubishi ASA
(However I have to assume that brains better than mine can get other ECU to work.)

If you are not sure send me your chassis number (which, I think,should start with N23W followed by seven numbers) and I will plug it into the parts database and check it for you. OR you could download the ASA for yourself. It is very useful.