WTB: T3/ext. gate manifold

[vr423q]

Hey Guys

Looking for a t3 manifold with external gate provision to suit evo head as have already got a 35/40 waiting.

Cheers

Joe

 

[Cranked]

I'm onlt running an Ebay special atm, was only meant to be a temporary measure, but 18months on and it's still there. supporting 400 atw hp.

http://cgi.ebay.com.au/Lancer-Evolu...=AU_Car_Parts_Accessories&hash=item27b0086f4c

http://cgi.ebay.com.au/EVO-1-2-3-TU...=AU_Car_Parts_Accessories&hash=item415172097f

These are stainless like mine, but have seen the same design in mild steel on ebay too, but can't find one.

Although i did have to modify the gate position to fit a tial gate. Just put genuine tial flange, bigger diameter pipe and shorten the ext pipe.
$200 to your door i think i paid.

Other than that, custom steampipe mani, Lee at ETM (Extreme Turbo Manifolds) will be doing my new mani, when i get to it. He's got mani of mine to get flanges and shit cut.

Cheers, Sean

 

[Dean]

Id go for this one.
http://cgi.ebay.com.au/BRAND-NEW-EV...=AU_Car_Parts_Accessories&hash=item4aa361beb9

 

[to4garret]

Id go for this one.
http://cgi.ebay.com.au/BRAND-NEW-EV...=AU_Car_Parts_Accessories&hash=item4aa361beb9

I got caught out by the pictures being for a EVO 4+

only thing i dont like about those manifolds that have the gate pointing straight out is the clearance around out powersteering pumps.

 

[Dean]

go caught out by the pictures being for a EVO 4+

only thing i dont like about those manifolds that have the gate pointing straight out is the clearance around out powersteering pumps.

Nah it's for a 1-3, he's just mounted it on a 4+ head as per his add.

 

[vr423q]

Wasn't to keen on an ebay one though from experience above seem ok, mild steel one isnt too bad either.
Thanks guys.

 

[Cranked]

I got caught out by the pictures being for a EVO 4+

only thing i dont like about those manifolds that have the gate pointing straight out is the clearance around out powersteering pumps.

Yeah this is why i had to shorten the pipe to the gate. And then made heat shield for the of p/s pump.

 

[milkandoj]

I got one, its built like a tank with thick stainless not like the thinner ebay stuff, pm me if you interested.
I bought it recently but already decided to stay bolt up not t3.