you guys will know

[stavro]

Hi there

Just wondering if you know what brake upgrade you can do to a 95 Galant or a legnum if any.

or

Where i could find some twin pods of a 95 Galant or legnum or if somebody on here had some.

if ANYBODY could help me out that would be great.

Thank you

 

[bazeng]

Don't guys go EVO Brembos??

 

[evo-gsr]

I have a set of twin pots from a 97 Legnum if your keen....PM me if you want them?

 

[evo-gsr]

I have a set of twin pots from a 97 Legnum if your keen....PM me if you want them?

 

[stavro]

pm sent mate

 

[CLuTZ]

They all have twin pots? The only bolt on upgrade is EVO Brembos but you need facelift front hubs for that if you're running a PFL

Lots of info on OZ VR4

 

[stavro]

They all have twin pots? The only bolt on upgrade is EVO Brembos but you need facelift front hubs for that if you're running a PFL

Lots of info on OZ VR4

What are facelift front hubs are.

And are they for the CB lancer. Bcoz that's what I want them for.

 

[micky_vr4]

And are they for the CB lancer. Bcoz that's what I want them for.

I thought you wanted them for a 95 galant/legnum...?

 

[stavro]

Them brakes bolt on to the CB hubs so I can run 294mm disks

 

[stavro]

So dose anybody have the front twin pods that I need.

 

[CLuTZ]

Im confused too...

What exactly do you want to do?

 

[stavro]

Ok. I've got a CB lancer and I'm doing a brake up grade on it.
The 95 legnum twin pods bolt on to my hubs on the CB and I can fit 294mm disk.

Or I want to know what brake upgrade someone would do to there legnum
So then I can put them on my car.

 

[oggy]

as Clutz said: facelift legnums (ie. later model legnums, can't remember the years) have different hubs and can upgrade to late model evo brembos.

I would think standard legnum twin pistons with that size disc would work well on the smaller cb!

 

[stavro]

Well that's why I'm trying to do it. And the brembos don't fit alrdy Tried.

 

[oggy]

Thats because they only fit late model hubs, not early model. They early models will either have to upgrade to late model hubs or make up brackets. your case would require custom brackets I would think

 

[stavro]

Do you know anybody that has the plates made or know where to get them from.

 

[EVOCPE]

So CB lancers have the same bolt spacing as early EVO1/2/3?? why dont you just run EVO1/2/3 or Vr4 Twin pistn calipers and 276mm disks

 

[oggy]

I think he already has 294mm legnum discs and twin pots..... ?
and is looking to upgrade from these....... ?

have you actually tried the twin pots yet Starvo? I would imagine they would be a fairly good upgrade over standard!