Search results

Thanks for the response guys and the little extra info. I have contacted two of you thus far, Frank-E will let you know if the other two options fall through as I can view the others due to their locations. Thanks

Wanted: Camshafts HKS 264 or stock E3's Item Info: Chasing inlet and exhaust camshafts for a 63T head rebuild. Looking for either genuine Evo 3's or a set of HKS 264's(a long shot but worth asking). Contact Details: Pm us is preferable Other: Can arrange for pickup in Brisbane/Gold Coast...

TO4 - should work in any year RVR, but for reference the ECU number on my car is as follows: MD 312467 E2T37876 5225 E The E in final line means you can run the Eprom setup in that ECU, first line is the Mitsubishi reference and from what I understand Hyper and some SSG both use this code...

Yep all good to go and play :w00t: Thanks for your PM's on the subject.

Hi all, I am just posting this to let other RVR owners know that I am now running the ECM Tuning chip and software in my RVR and could not be happier with the product or the service. Tom (twdorris) has been a pleasure to deal with during the whole process and as such I thought I would give...

seals Just the normal stuff like rtv on the balance shaft tensioner, treat it like any other 4g63 at the end of the day. As for cleaning the area I pulled the crank angle sensor off and cleaned it by hand, then with cas still off degreased the entire area with biodegredable bicycle degreaser...

seals Grab a seal kit from meek http://www.meek.com.au/index.php?act=viewProd&productId=222 and replace the seals, obviuosly the one behind your balance shaft is the problem but while the belt is removed you might as well do the rest. I had the same problem with my rvr when it first...

location Pic below illustrates the location I chose (silver can between battery and water fill) however depends on battery size. I custom made an aluminium bracket and utilized battery tray bolts. There is a drain in the bottom for a hose to drain off every 6 months. Just my 2 cents. Also...

carrier bearing part # More parts numbers Carrier Bearing (Propshaft bearing) - Hardy Spicer MI-30-6930 MB505495 Cheaper than Mitsubishi OEM - about $111 is what I paid.

Dump Pipe PM sent on the dump pipe

PM sent RE BOV and Boost controler