Search results

$500. Comes with stand and chain. - Engine has been fully machined and fitted with new Pistons, Rings, Bearings and Gaskets. Don't know how to post pics...

Thanks all for your help. I've decided to go the 2.4L route as I picked up a reconditioned G4CS. If any1 is interested I can get another Hyundai Sonata 2.4l G4CS.

Have you had your engine apart. What's it condition? At this stage I'm considering yours. Had offer for a cheap evo motor as well but I guess I would have to change mounts and stuff.

I don't really require a full build motor as its just gonna be put into my spare run around car. As long as it works and won't give me any trouble. $600-800.

As above topic. Prefer pick up in Melbourne.

So the evo I&II do not use the secondary air supply valve? I have an evo II RS engine and have never noticed it before until I got the evo III cooler piping. Thanks for your help.

Hi All Can some1 explained to me alittle about the secondary air supply valve and how to connect it? I have an Evo 1 and apparently my cooler piping doesn't have the hose to connect to this valve. The evo 1 piping were a bit banged up so I recently bought an Evo 3 intercooler piping and it has...

http://www.maperformance.com/dsm-engine-components-and-cooling/ These guys are pretty good. I'm ordering my bottom end stuff from them at the moment.

What type of nipple/treading for the vacuum port? Do u still have it? Do you have the rest of piping?

Hi Do you have pics of: Evo 8MR BOV welded onto 2 1/4" alloy upper intercooler pipe (ex-plazmaman) - $100 Thanks

These guages are made by Lamco for Mitsubishi. They come as a selected option on Evo I, VIII MR AND IX MR. The Evo VIII MR AND IX MR has higher temp and boost reading. I think 120/150 degree and 1/1.5 bar of boost compare to the Evo I. There is a set on eBay - must select worldwide in search...

It's been awhile since i did this mod, but its straight forward. I think there is only 1 bolt which hold the steering wheel in place. The Evo 4-6 steering wheel would have a +ve and -ve for you to connect ur horn. U might need to extend this wire. U wouldn't need to give power to the Airbag...

Not sure for cc gsr, but Evo 1-6 steering wheel all fit ones another. Even SRS STEERING WHEEL from an evo4-6 WILL FIT Evo 1-3. I've had an Evo 6 steering wheel on my Evo 2. Just the airbag don't work. No mods needed.

Call around and you'll see what they quote.

Carrier bearing at Mitsubishi - must quote part number MB837576. Just need 1 if gsr or Evo. $60 plus gst. Got my uni joint from Statewide Bearing, but you can probably get it from any bearing place. Part number RUJ1783. this number could be different at other places. You need 2. About $17 each...

Had the tail shaft off and taken to G&J DRIVELINE to change universal joint, carrier bearing, rubber boot between the 2 shaft and a re-balance today. Evo 3 gsr. The issue was vibration noise on deceleration. Gears also crunch a bit on 2nd and 3rd. The outcome was gear don't crunch anymore. Car...

Check your tailshaft carrier bearing. It might be on its way out or the bushes which hold them are worn. Adjust your coil over a bit stiffer at the front which will help eliminate the noise until you get it fix.