Wtb: Galant vr4 4g63t motor

[JDMEvo]

As above topic. Prefer pick up in Melbourne.

 

[bazeng]

Check out my engine for sale.

Ready to go.

currently on Ebay.

http://pages.ebay.com/link/?nav=item.view&id=171035561541

 

[david c]

I've got a spare motor that I had built by rob/nick and have never run it. How much you want to spend?

 

[JDMEvo]

I don't really require a full build motor as its just gonna be put into my spare run around car.
As long as it works and won't give me any trouble. $600-800.

 

[bazeng]

You won't get much out of that type of $.

Maybe an NA engine from the wreckers?
Or Ebay sometime has some engines going cheap.

Problem is you don't know the true condition unless you pull it apart or see it running prior.

 

[JDMEvo]

You won't get much out of that type of $.

Maybe an NA engine from the wreckers?
Or Ebay sometime has some engines going cheap.

Problem is you don't know the true condition unless you pull it apart or see it running prior.

Have you had your engine apart. What's it condition? At this stage I'm considering yours. Had offer for a cheap evo motor as well but I guess I would have to change mounts and stuff.

 

[4piknup]

Evo motor wont go in a vr4 as it hasnt got the mounts for the roll stops...
Na sonata 93-99 will go in. And cheap. Got mine for $100 but had to pull it out

 

[Gianni]

I have a non turbo 2L and all the vr4 bolt ons if your interested.
Turbo conversion parts that come with are
Td0516g with lines
4g63 mani
Dump pipe
2.5" exhaust (up to fuel tank)
Lotus twin tip muffler
Vr4 cooler pipes,
vr4 throttle body,
Vr4 cooler
Vr4 injectors
Vr4 ecu
Vr4 MAF
Vr4 intake pipe
Vr4 cams
Metal bov
Stock boost control solenoid
Fuel pressure solenoid
Oil pump,
Oil cooler and stock lines
Water tap with water sensors ect.
Front water pipe
Wanting $1200 for the lot though.

 

[JDMEvo]

Thanks all for your help.
I've decided to go the 2.4L route as I picked up a reconditioned G4CS. If any1 is interested I can get another Hyundai Sonata 2.4l G4CS.

 

[evo-gsr]

^ how much?

 

[JDMEvo]

$500. Comes with stand and chain.
- Engine has been fully machined and fitted with new Pistons, Rings, Bearings and Gaskets.

Don't know how to post pics...

 

[evo-gsr]

Stand and chain??

As for posting pics...use photobucket...its free.
Upload pics to photobucket then copy IMG code into your post. Easy.

 

[ENGINR]

Sounds like a good deal - I paid more than that for a block!! :unsure:

 

[JDMEvo]

Stand and chain for easy to transport.
http://s1275.photobucket.com/user/jdmevo1/media/image_zpscd05533b.jpg.html

 

[JDMEvo]

Only problem is, you have to organise your own freight.

 

[4piknup]

G4cs has only a single cam head so you need a g4cp head (or vr4 or modded evo)
Also it may have no valve cutouts on the pistons so tread carefully.
Wiseco do 6bolt pistons in 020 over for the g4cs

 

[JDMEvo]

G4cs has only a single cam head so you need a g4cp head (or vr4 or modded evo)
Also it may have no valve cutouts on the pistons so tread carefully.
Wiseco do 6bolt pistons in 020 over for the g4cs

Was think of the Mahle or Wiseco 86.5 piston. Not too sure on compression ratio. Any suggestions?

 

[4piknup]

You have to measure bore first. It might be already bored to 87mm.
Cp do 87mm pistons but they are for 2g rods. Wiseco do either 1g or 2g 87mm pistons. 1g will fit your rods. I think they are 564m87
Your rods are the same as the vr4 1g rods.

Congrats on a good pick up. Are they old stock at a engine recon shop?

 

[ENGINR]

^ Yeah, keen to know where you scored it from - I made tonnes of phone calls to wreckers and put the word out over their 'hotline' and came up with zero.

 

[4piknup]

I did the same. And the same for a auto gearbox.

I ended up with a low km import engine from brisbane...