Car won't start with e85

4GTuner

Help Support 4GTuner:

86psi

Member
Joined
Jan 23, 2007
Messages
562
Location
Townsville
Hey guys finally got around to setting up my car for e85 and thought I'd see if I can get it running with the 1000cc I'd injectors before I change to the 2000cc injectors before her tune. Prob is I can't get it started ecu is motec m4 have played between 0 and 30% on the overall fuel trim but still won't start.
Any ideas??
 
How big were the injectors you replaced with the 1000's? When I went from 1000cc to 2433cc the car wouldn't start and the injector settings in the ECU needed to be altered to compensate.
 
Thanks dougmo I got a feeling it might have something to do with my cold start settings as I had starting dramas when I changed to the 1000cc injectors it seemed to over fuel. Will let it sit over night see how it goes tomorrow. I'm booked in for about 5 hours dyno time on the 27th so I'm starting to get a little worried
 
Got her going had to max out the overall trim to get her started then back it off to 20% to get the airfuels right once at operating temp. You were dead on with that one dougmo.
Looks like I have to play with the cold start settings to get her going when cold but other then that I should make the dyno on time. Thanks for everyone's input
 
Lol nope can't rebook you won't miss much anyway just some low boost tuning way too hot up here ATM to do anything serious
 

Latest posts

Back
Top