EOI: 4GTuner Stickers

4GTuner

Help Support 4GTuner:

lol... yes a good call Marc :) Im not sure about the sticker situation, but details for the 4GTuner shirts have been sorted today. Robtom will request EOI's and sizes shortly. Get ready to eat humble pie to those that thought it would never happen lol :p
 
something_wild said:
Just to add something further, I read the entire thread (I've actually been keeping my eye on it since 2010, when I first purchased my rvr and wanted to put some 4g.com stickers) and came across Sivart's post, and how he'd made an 'unofficial' sticker for a meet. Without knowing the ins and outs of his input into the forum, I assumed I could do the same. I actually pm'd Sivart asking for a pair of his as I was tired of waiting but purchased my stickers the day before he replied saying he'd be happy to send some (thanks again dude).
Anyway, sorry again mods for the misunderstanding. Look forward to purchasing a couple of official ones in the (hopefully) not-too-distant future
Click to expand...

Im just waiting for the Vector off GSRSOL so its official, you would have got one of them , mine is off the car as of the next day, a DAYZ decal is there now :), but the evo will get a 4GT decal soon
 
Official sticker or not, i think any promotion of the site is a good thing. We don't want to turn into another Mitsubishi enthusiast forum do we?

I had some made up for when i raced but decided to leave then off the car at the time. I was planning to use them for the next time out. Maybe i shouldn't now?
 
bazeng said:
Official sticker or not, i think any promotion of the site is a good thing. We don't want to turn into another Mitsubishi enthusiast forum do we?

I had some made up for when i raced but decided to leave then off the car at the time. I was planning to use them for the next time out. Maybe i shouldn't now?
Click to expand...

That was exactly my thought Baz, I mean It's not perfect buy who the hell besides us on the forums would tell the difference...It's a good quality sticker in a clear legible size....if it gets a few new guys on here, can't be a bad thing ;)
Ps Baz getting the rvr down to springy for It's 100k km major next week. Anything in particular I should request....timing belt was done at around 65000 (gates racing). So just a full service plus all diff, t.fer case fluids, g.box fluid etc? Tune?
 
I think it shows pride toward the forum that some of you went ahead and made up your own stckers to represent the forum when stickers werent available. For that, I give you the thumbs up :thumbsup:
However I believe that when the time comes, it will show even greater pride and support to purchase an official sticker (one that has been endorsed by Admin and sold through the forum) where the price for purchasing a sticker would include a small donation to keep 4GTuner up and running for a long time to come :thumbsup: :thumbsup: :thumbsup:
 
Hahhahah shooosh, i have already organized it, just need final measurements of a GSR quater window at the bottom
 
I seen that, Jack wrote 200 x 50mm which will distort the writingand make it taller, to keep the aspect for 200mm wide, the hight will need to be around 20/22mm

Does that sound ok for you guys?

Below is how it looks in a few sizes
 

Attachments

  • 4G.jpg
    4G.jpg
    65.4 KB
Someone with a gsr/evo should print out the designs to scale on white paper and place it against their window to double check measurements Does Jack own a sedan?
Also what is the width of a VR4 rear quarter glass?
I think the length of the sticker will need to be reduced lower than 200mm to also fit a VR4 and also to improve the aspect ratio. Unless Youre getting different sizes made?
 
i just measured my window, 200 is fine as the window is alot longer but the 50 tall, the window curves at 50mm .

i think 200x25mmif poss ...

200x20 just in my opinion just doesnt stand out as much and your right 200x50 looks a bit stretched
 
True TJ said:
shirts before the 2 year old sticker thread? lol
Click to expand...

Almost 3 years old.
EVO-00X said:
Someone with a gsr/evo should print out the designs to scale on white paper and place it against their window to double check measurements Does Jack own a sedan?
Click to expand...

No..he owns a Jumbuck.

True TJ said:
i just measured my window, 200 is fine as the window is alot longer but the 50 tall, the window curves at 50mm .
Click to expand...

The window only slightly goes away from flat above 50mm nothing that would be classed as a curve,or affect the sticker adhering properly at all..
I had a Meek sticker on mine ages ago it was much taller than 50mm and stuck fine.
May as well make it a decent size if your going to make a sticker..have it so its easily read.
 
EVO-00X said:
Someone with a gsr/evo should print out the designs to scale on white paper and place it against their window to double check measurements Does Jack own a sedan?
Also what is the width of a VR4 rear quarter glass?
I think the length of the sticker will need to be reduced lower than 200mm to also fit a VR4 and also to improve the aspect ratio. Unless Youre getting different sizes made?
Click to expand...

would love to get different sizes to suir vr4s and coupes but means it will be dearer due to printing 3 types, ill ask and see what deal they can do
 
Ye all of little faith.
Stickers only available if you buy a 4GTuner shirt first lol..... (joking of course) :p
 

Similar threads

B
Wolf 3D Set-Up Headaches!
Replies
17
Views
3K
Booyar
B
Bodman456
Boden's RVR HSGR
2 3 4
Replies
79
Views
13K
jengi
J
I
Ian91 Garage sale/ I need rego money thread
2 3
Replies
50
Views
5K
cubic
cubic
bazeng
Bazengs Clearance Sale - Lots of parts
2 3
Replies
50
Views
6K
bazeng
bazeng
vsthis
  • Locked
VSTHIS 1994 GSR Lancer with EvoII conversion
Replies
13
Views
3K
BYBY5L
BYBY5L

Latest posts

Back
Top