evo 6 brembo conversion for rvr

[dj_konix]

Hey There,
So i came across a cheap set of evo 6 rotors, calipers and lines and just wondering if anyone knows if these will fit or not?
Might have to try and find some photos of the evo 6 setup up close to determine before i start pulling it apart.
i want bigger brakes!!

 

[vuonguz]

can you show us some photos of your beast with those rims

 

[MattL]

There is a multitude of mods required to make it all fit, how much time, money and effort do you want to put into it all?

 

[TBOWGN]

And a pic of your front bar...

 

[dj_konix]

front bar? wheels? neither has to do with brakes but ok i'll take photos today
MattL, im willing to go as far as making new brackets to fit calipers, i got the whole brake setup for nothing off a local guy that has upgraded to AP Racing

 

[SyKRyD]

If you can make the correct brackets, then it's just a matter of getting rotors, pads and brake lines. You'll possibly want to look at upgrading your master cylinder and booster.

 

[MattL]

Brackets aren't required.

Tierod ends need to be changed
Hubs need to be changed
some minor suspension know how
You "should" do some machining to the tierod end, but that's not essential, but I think it would help

 

[Rockabilly]

Front = Verada hubs, reversed tierod ends..ABS mod required.
Rear I haven't sussed out fully, bolt centres only require one hole to be enlongated & leave one hole std so it stays put.
Our brakes are pretty good, but flying down hill through some mountain roads (Kangaroo Valley) made my fronts STINK/Fade a bit.
Cheers !

 

[MattL]

Rear are a direct bolt Aldo!

 

[CLuTZ]

Rear are a direct bolt Aldo!

They might bolt on, but the Brembos run an internal drum handbrake- and RVR's use a cable.

 

[MattL]

Brick behind the tyres when you park somewhere will easily fix that! :lol:

 

[MattL]

hey CLuTZ went and looked at my car today and my mechanic's who is running E8 Rears on his and they were a direct bolt basically. Same size for everything, not drama's. Not sure if e6 is the same, but I've always been led to believe they are...

 

[RVR97]

Hey There,
So i came across a cheap set of evo 6 rotors, calipers and lines and just wondering if anyone knows if these will fit or not?
Might have to try and find some photos of the evo 6 setup up close to determine before i start pulling it apart.
i want bigger brakes!!

Hey QIK-247, any updates on your brembo installation?