FS - Brand New GT Pumps EVO3 Turbine Housing w 34mm Flapper

[ENGINR]

I was going to install this on my turbo but when I removed it from the manifold I found that the compressor blade has been damaged by something.

I can't afford to replace the compressor wheel and rebuild the turbo at the moment so I'm going to put a cover over the Coupe and forget about it for a while.

Meantime I want some $$$ to pay some bills and this turbine housing should be used for more than a paperweight.

Brand new, never used, EVO3 enhanced Turbine housing with the 34mm flapper and larger cast inlet, purchased from Mark at GT Pumps about 2 weeks ago.

$330.

I'm losing out here as I paid $15 postage to get it to Melbourne too.

 

[3zercrowd]

First in huh

Umm..I got a mate up here who may want it.

Ill let him know :wink:

 

[ENGINR]

Yep - "first in best dressed" as they say.

 

[ENGINR]

* BUMP *

I'm considering letting my turbo go with this too - will definitely need to replace the compressor wheel and re-balance the assembly. It had a rebuild kit put in it when it was rebuilt approx 500km ago, but I can't gurantee that the bearings won't need to be replaced when it's stripped down due to the comp wheel possibly being out of balance due to the slight damage. Run at max 15psi for about 20% of total driving time.

Turbo with damaged compressor wheel, assembled with core and standard E3 turbine housing I'm considering letting go for $450 in addition to the $330 wanted for the turbine housing. Will only sell the turbo if the turbine housing is sold as I don't want to be stuck with the turbo and if I get around to rebuilding it have to buy another 34mm flapper turbine housing.

 

[contract3]

how much will it roughly cost for a rebuild?

 

[Liberoz]

how much will it roughly cost for a rebuild?

contact www.GTPumps.com.au for rebuild prices and parts

 

[ENGINR]

NO LONGER FOR SALE.

HAVE DECIDED TO REBUILD.