G4 RACING COILOVERS FOR VR4

[JAP63]

Seen these on Ebay.

Anyone know anything about them?
Im considering building my own set,but it works out expensive just in parts,So i found these for $1399.
Therye Taiwanese built so i wouldnt know about the quality..?

But the guy who sells them says theyre yet to have a problem in 6-12 months...

What u think?

http://cgi.ebay.com.au/G4-RACING-CO...ryZ55436QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

 

[to4garret]

they're made in the same factory as D2 and greedy AFAIK

so they're basically the same, different colour.

 

[tharaka]

im going to get a set, my current coilovers are too soft for the track, but great for daily driving

i just need to figure out some spring rates

 

[WRCVR4]

im going to get a set, my current coilovers are too soft for the track, but great for daily driving

i just need to figure out some spring rates

Get your current ones re-valved ? and different springs ? mmmm Helper springs

 

[tharaka]

im going to get a set, my current coilovers are too soft for the track, but great for daily driving

i just need to figure out some spring rates

Get your current ones re-valved ? and different springs ? mmmm Helper springs

its easier to buy new ones

 

[rock_it]

Just Jap is just down the road from me.. I have had friends put these in various other cars and they are happy with them....

 

[crossam]

i have a set of tein HA hight and damper adjustable coilovers.
these come with the small helper springs, the spring rates i have are
8kg/mm front and 6kg/mm rear.

in my opinion i wouldnt go any harder then this, in fact i would go as far to say the front it probably a little too stiff.

 

[tharaka]

i have a set of tein HA hight and damper adjustable coilovers.
these come with the small helper springs, the spring rates i have are
8kg/mm front and 6kg/mm rear.

in my opinion i wouldnt go any harder then this, in fact i would go as far to say the front it probably a little too stiff.

i was planning to get 8 front and 7 rear

but i guess i'll look into 7 front and 6 rear

 

[rob323]

I changed my front hotbits from 8 kg fronts to 6 kg/mm for better control and less front to rear pitching, suits tarmac sprints much better. Rears are 4 kg/mm. But they are too soft for circuit work with semislicks (too much body roll).