JayRome
Blurring the line between 1st to 3rd Gen engines..
hey guys......need a hand... may have already solved this somewere on this site but any way.....
this problem is starting to piss me off now and i have looked over almost every thing and i cant seem to pin point the problem. i have a Galant GSR with a 4G63 worked N/A but still stock ecu and runs fine, engine was rebuilt about a year ago by old owner and is fairly much A1 besides the normal ticking noise from the 1st gen engines. also all egr accessories have been shut off and a Cyclone Intake used......
now the problem, once in a blue moon while at long idle (hot and cold days) my engine seems to fluctuat in RPM then either come back to normal or just die, but starts like normal straight after....... checked over almost every thing, but i havent checked over the relays that run the engine accesories which are incabin on top of the fuse box and also the crank angle sensor which i dont think is that cause the engine is perfect at 7K RPM....
wanting to check:
fuel pump relay
fuel filter
idle speed controll servo
ECU board for cracks
any other ideas would be reallly helpfull guys
thanks, Regards
Jerome
this problem is starting to piss me off now and i have looked over almost every thing and i cant seem to pin point the problem. i have a Galant GSR with a 4G63 worked N/A but still stock ecu and runs fine, engine was rebuilt about a year ago by old owner and is fairly much A1 besides the normal ticking noise from the 1st gen engines. also all egr accessories have been shut off and a Cyclone Intake used......
now the problem, once in a blue moon while at long idle (hot and cold days) my engine seems to fluctuat in RPM then either come back to normal or just die, but starts like normal straight after....... checked over almost every thing, but i havent checked over the relays that run the engine accesories which are incabin on top of the fuse box and also the crank angle sensor which i dont think is that cause the engine is perfect at 7K RPM....
wanting to check:
fuel pump relay
fuel filter
idle speed controll servo
ECU board for cracks
any other ideas would be reallly helpfull guys
thanks, Regards
Jerome