GSR Gearbox will it fit on rvr sports gear

[Ce9aboy]

Hi guys!!

I own a 95 Mitsubishi rvr sport gear, now my auto trans is playing up and getting bored cruising with the auto and time for a change. now has any one done a conversion ussing cc 94 GSR manual trans?? will it bolt up to the rvr transfercase ?? is it a straght foward procedure or its a ball breaker?? im located in melbourne does any one have a manual trans that you what to sell?? just pm me

 

[BMGTZ]

Hi guys!!

I own a 95 Mitsubishi rvr sport gear, now my auto trans is playing up and getting bored cruising with the auto and time for a change. now has any one done a conversion ussing cc 94 GSR manual trans?? will it bolt up to the rvr transfercase ?? is it a straght foward procedure or its a ball breaker?? im located in melbourne does any one have a manual trans that you what to sell?? just pm me

I have done the reverse a couple of times and put rvr into gsr. BUT you have to change your back diff to to match.

 

[Ce9aboy]

Ok....so the rvr box will bolt onto a gsr. Reason for me asking is because I got a complete gsr and I was planing on pulling out all the drive train n converting my rvr to manual.if I was to use the gsr box will the rvr transfercase bolt up to the gsr ?? Or I gotta use the gsr transfercase ?? How about the diff, does the gsr bolt up to rvr ??

 

[BMGTZ]

Ok....so the rvr box will bolt onto a gsr. yes


if I was to use the gsr box will the rvr transfercase bolt up to the gsr ?? yes



How about the diff, does the gsr bolt up to rvr ?? dont know!

 

[Ce9aboy]

Thanks BMGTZ I'll be doing the conversion over the weekend hopefully everything goes well. By the way do you know any wreckers in Australia that deals alot with these rvr ?? Because I'm after a hypergear complete front bar and side skirt

 

[MattL]

I might be able to get you a front bar and skirts if you need.
Best thing to do is send me a pm

 

[vr401]

Auto transfare case wont bolt onto manual box

 

[vr401]

Also, starter motor from auto is not good with manual flywheel

 

[Ce9aboy]

Also, starter motor from auto is not good with manual flywheel

So if I was to use the gsr starter motor and Evo flywheel that will be allright ??


What about the netrual switch, is there any thought of modification that you have to do so your able to start the car ?

Thanks heaps guys!

 

[MattL]

Neutral switch only needs to be applied during start up. They make an amazing immobiliser. I know many guys who've put them in as a push button to hold during start up. Saw a mate try and start it one day and it took him about 30 minutes to figure whilst we laughed from the back porch of my mates house. It certainly is fun!

 

[Ce9aboy]

Neutral switch only needs to be applied during start up. They make an amazing immobiliser. I know many guys who've put them in as a push button to hold during start up. Saw a mate try and start it one day and it took him about 30 minutes to figure whilst we laughed from the back porch of my mates house. It certainly is fun!

That's awesome might do that