mirage hatch question

4GTuner

Help Support 4GTuner:

antos

Well-Known Member
Joined
Sep 18, 2007
Messages
64
Location
brisvegas
hi all, just curious what size injectors are in the 1.5ltr mirage hatch? can gsr injectors be used? is there a slightly bigger plenum you could bolt onto the 1.5 motor instead of that small one thats on there? just curious cause havnt mucked round much with stock stuff etc.. can standard ecu be chipped easily enough to run bit more fuel/air?

just trying to find little info for a mate.

cheers
anthony
 
You're wasting your time modding a 4g15 EFI I reckon. If you want shits and giggles, put it on the bottle.....
 
CLuTZ said:
You're wasting your time modding a 4g15 EFI I reckon. If you want shits and giggles, put it on the bottle.....


true true, i guess each to there own, i said evo motor into it, or cyborg 1.8 is it?

thanks for the other imput too DOUGMO
 
antos said:
true true, i guess each to there own, i said evo motor into it, or cyborg 1.8 is it?

thanks for the other imput too DOUGMO


cyborg 1.8? They're all 1.6's! :w00t:
 
there are quite a few diff between the cyborg version of the later mirages to the aust del ones.

the 1.6lt mivec motors are ment to be a blast to drive, they are 130kw and rev to 8g redline. the jap versions also have bigger brakes and 4x114.3 stud pattern, so the jap versions will fit the wheels aust ones wont.

mate of mine did super charger a 1.5 years ago. used those magna injectors with a greddy emanage to control it and wound in a decent amount of boost and made 120kw at wheels. and the thing was quite reliable to funly enough.
although i know people with turbo charged 1.5lt's and have had huge issues blowing head gaskets and all sorts.

have some more info on them too, and parts at work also if anyone needs some.
 
aus spec mirage/lancer are all 4X100 stud pattern unless an import/mivec then they are 4X114.3...
 

Latest posts

Back
Top