price drop Garrett, Gauges, Gates, Heads, Kframe and EVO LCASell OUT

4GTuner

Help Support 4GTuner:

(2much)

Well-Known Member
Joined
Dec 21, 2005
Messages
678
Location
Melbourne
In the interests of Garage sales, i'm going to sell a few parts, and clear out my shed a little.
PM if your interested, pics up soon.

happy to entertain offers guys,

Zacklee clear cam cover $55
Sard Fuel pressure regulator, and fuel rail adaptor $125
Polished fuel $100
Cusco Super Single clutch & lightweight Flywheel $550
Front strut brace $50
Garret T28 turbo, Custom Manifold $750
Evo 2 front K-Frame, with lower control arms $250
Oz Racing 15" Evo 2 rims no tires $400
Stuart Warner Boost & Oil Pressure gauges $120
4G93T head $150
4G93P Proton Head $125
ARP Head studs to suit 4g93 GSR $140
Evo 2 rear swaybar $90
King Springs Super Low $110
38mm external gate $90
evo 2 roof cut $50,

Cusco Super Single clutch,
with Cusco light weight flywheel, 4.8kg if i remember

Clutch was slipping on high rev launches, and would need a new clutch disc,
nengun.co.jp has some available.
$550


Coil On Plug setup.
comes with coils, the rocker cover centre and a wiring clip, purchased of a forum member about two years ago, never got around to using it, unknown condition.
$125

Front strut brace,
unknown brand, in good condition
$50


Garret T2x turbo,
Custom Steampipe manifold with T3/T4 exhaust flange. 4g63
All water and oil lines except return to sump.
braided oil feed line
I have a dump pipe to suit as well.
$750

Evo 2 front K-Frame, with lower control arms, with Evo sway bar
$250

Oz Racing 15" Evo 2 rims, in good condition, would require a repaint to look mint. not dented or buckled. no centre caps
$400

Stuart Warner
Maximum Performance Boost gauge (mech)
$80
Stuart Warner
Maximum Performance Oil Pressure gauge (mech)
$80
with all fittings, cups and mounts. take them both for $120

4G93T head,
unknown condition, was building a forgie, but changed plans, no longer needed.
comes with cams, gears, springs, lifters, rockers,
$150

4G93P Proton Head, basically the same without the oil fitting for the turbo, but you can drill and tap one, or run a line from the filter housing.
unknown condition (as i haven't used it) again, was building a forgie, but changed plans, no longer needed.
comes with cams, gears, springs, lifters, rockers, and intake manifold
$125

ARP Head studs to suit 4g93 GSR,
used once,
$140

Evo 2 rear swaybar,
upgrade for GSR, 18mm, with bushes, although i would replace them if i was fitting it. no swaybar links, but are the same as GSR, so you'll already have some.
$90

King Springs
Super Low F&R
$110


38mm unbranded external gate Tial style two bolt flange
Unknown condition, bought for plans that haven't eventuated.
$90

evo 2 roof cut,
no visible rust, but there the lining can be removed to check before you take it.
$50,
 

Attachments

  • Copy (2) of photo 1.JPG
    Copy (2) of photo 1.JPG
    73.4 KB
  • Copy (2) of photo 2.JPG
    Copy (2) of photo 2.JPG
    60.9 KB
  • Copy (2) of photo 3.JPG
    Copy (2) of photo 3.JPG
    72.7 KB
  • Copy of photo 1.JPG
    Copy of photo 1.JPG
    35 KB
  • Copy of photo 2.JPG
    Copy of photo 2.JPG
    33.2 KB
  • Copy of photo 3.JPG
    Copy of photo 3.JPG
    56.8 KB
  • Copy of photo 4.JPG
    Copy of photo 4.JPG
    38.7 KB
  • Copy of photo 5.JPG
    Copy of photo 5.JPG
    41 KB
  • photo 1.JPG
    photo 1.JPG
    57.2 KB
  • photo 2.JPG
    photo 2.JPG
    54.9 KB
  • photo 3.JPG
    photo 3.JPG
    58.4 KB
  • photo 4.JPG
    photo 4.JPG
    48.3 KB
  • photo 5.JPG
    photo 5.JPG
    37.1 KB
  • photo 6.JPG
    photo 6.JPG
    87.7 KB
  • photo 7.JPG
    photo 7.JPG
    107.6 KB
  • photo.JPG
    photo.JPG
    65.9 KB
Pics tonight, its for a 63, never used it, still in the same bag it was shipped to me, pics for everything tonight
 
I have full gsr looms except the doors, wasnt going to sell but offer me a price, ill see if i can be swayed, no seimens ecu tho, only mitsu
 
few more things up guys,

Zacklee clear cam cover slight damage at one of the valve cover mounting holes, pics up tonight $55

Sard Fuel pressure regulator, and fuel rail adaptor $125

Polished fuel rail not sure the details, but brand new, with mounting spacers, still in box, never used, bought off another forum member, since changed directions.
$100

Pics up tonight, price drop on other items at the top.
 
im in ringwood, pm me and we'll chat offline

pics for fuel reg and adaptor up tonight. no gauge, but it has a place to put one in.. was going to run my electronic sensor off it, for the incar gauge
 

Latest posts

Back
Top