Removing the RVR front bumper

[RVR97]

As the title says I'm looking step by step how to remove the front bumper of my RVR, I had a few hard days trying to remove the bumper for doing some boost leaks check.

I've removed the front/side lights on both sides, but something seems to be holding in the middle section? top and bottom... any help or pics would be appreciated.

Wae

 

[umpc1611]

Sorry, don't have photos or step by step, but as I remember from taking mine off the HSG-R, there are 2 10mm hex head bolts fastening it up top (horizontal, towards the top of the radiator), and 2 more hidden ones at the two extreme corners, up inside the black plastic shrouds that form the wheel wells; these will be vertical, whereas the phillips head screw plastic retaining clips that fasten it to the wheel well shrouds at the corners below (4 total) are horizontal - remove them first and it's easier to get to the "hidden" ones. And don't forget the 2 retaining clips underneath.

 

[dj_konix]

i can do a photo guide to it if you would like? it takes 10mins to remove, just leave the ones up near the radiator last as they can hold it all on. I found it best to remove the ones hiding behind the front bar indicators first then attacking the philips head ones and the 10mm guards ones next and then popping out the two clips on the under tray

 

[RVR97]

Please do take pics if you can... I know there are 4 bolts at the top mid, i undo those nuts, and some thing is still holding in the middle.......

 

[dj_konix]

the under tray their is two gay lil black clips