thumping noise from rear

[bps79]

Took my car for a spin today and noticed after taking off reasonably hard in first i now have a loud thumping noise from the rear under hard acceleration.Rear uni joint seems ok.What do you guys think.Dont say its the diff
cheers
Brad

 

[Jonson]

Rotational noise? Sounds like Tailshaft.

 

[bps79]

I was thinking (and hoping) it could be the centre bearing.What do they do when they fuck up

 

[Jonson]

Centre bearing can sag. When it sags it doesnt keep the tailshaft running true. You'll notice a vibration on take off, sometimes Decel. A Thud while moving could be a uni joint or flat spotted bearing....Maybe a fucked tyre if your lucky.

 

[brisvr4]

If it is a thumping noise under hard acceleration then it will be your carrier bearings on the tailshaft. Mine does the exact same thing and mine are shagged.

 

[bps79]

If it is a thumping noise under hard acceleration then it will be your carrier bearings on the tailshaft. Mine does the exact same thing and mine are shagged.

sweet no diff change for me

 

[bazeng]

carrier bearings are about 150 each..
fingers crossed that they are the problem...

 

[brisvr4]

Actually they can be had for about $75 each I think Barry.
I'll have to check though.
I have a set that Rob bought and the invoice was for $75 each. For that price you might as well have them changed
Driveline services in Brisbane sell em.

 

[DOUGMO]

check the bushes on the arms that hold the diff too

 

[EVO-00X]

could be your subwoofers TIC

 

[JiMi]

mine has a similar noise/problem.... its only pretty much stock but when there is hard accel it feels like a back tyre is struggling for traction and there is a thumping noise... its most noticable in third but that may be because it spends longer in that gear so you have more of a chance to notice it... i was presuming/hopeing diff bushes... needless to say i'm very interested in the results as it gives me somewhere to look when i get home

 

[CLuTZ]

$75 carrier bearing?? They're $250+ from mitsi!

 

[brisvr4]

$75 carrier bearing?? They're $250+ from mitsi!

Don't buy them from Mitsi then

 

[Jonson]

Or get a job at a Mitsu dealer and make friends with a parts interpreter.

 

[Yushman]

You can get the centre bearing complete from Hardy Spicer $120+GST

 

[Pyro]

Where / what is hardy spicer, net? shop in Adelaide? Contact number?

 

[Yushman]

Hardy Spicer Branch Listing Adelaide
56-58 Churchill Road North
Dry Creek South Australia, 5094

Telephone: (08) 8349 6400
Facsimile: (08) 8349 5264

Website: http://www.hardyspicer.com.au/hspicer.asp
Email: [email protected]
Customer Service:
Manager: Robert Turnbull (0409 281 586)
Hydraulics: David Pallant (0408 653 226)
Driveshafts: Peter West (0417 862 225)

Part# MI-30-9930

 

[Pyro]

Thanks mate!

 

[kayarubin]

yup.. center bearing...

 

[Yushman]

Just got 1 and it was $100.29 from Hardy Spicer