Trackday this Sunday What's the best DIY mods to improve our engine on RVR/Chariot GT?

4GTuner

Help Support 4GTuner:

chariotgthk

Well-Known Member
Joined
Jun 6, 2011
Messages
51
Location
Hong Kong
Any brainstorming idea for that guys?

I am thinking of changing to a better bov (prevent pressure leak during high boost) , further enlarging my throttle bodies or installing a better intercooler that keeps being top mounted above the engine

Any better ideas?

Many thanks :rolleyes:
 

Attachments

  • CGT.jpg
    CGT.jpg
    45.6 KB
Here shows some of my simple mods to boost, ignition and bandage to warp around air intake piping
 

Attachments

  • Bandage.jpg
    Bandage.jpg
    50.5 KB
  • Ignition.jpg
    Ignition.jpg
    57.8 KB
If you have time before the track day then definitely go the front mount intercooler, top mount will get sooo much heat soak at the track day and virtually be useless.
Or if the track officials don't mind, take an esky full of ice, get an icecream container and cut the bottom out of it and stick it on the top of your intercooler betweens run and put ice in it, that will bring the temps down.... the only issues there is once you have removed it before next run it could make your car look like its leaking water ever though its not.

BEST mod i did before a trackday was remove ANYTHING that didnt need to be in there, rear seat in our rvrs is like 40kgs+, rear spare tyre carrier was 45kgs+ and all the carpet etc
Good luck, i also have a track day sunday :)
 
Thanks mate
No rush to do that this Weekend since the trackday was cancelled due to bad weather
My solution now is just to wrap around pipes and install a heat insulating plate under the intercooler later to prevent it from soaking heat

I have such a small front bumper that makes me not sure if any front mount cooler shall fit it
 

Attachments

  • Shotgun muffler.jpg
    Shotgun muffler.jpg
    46 KB
  • Engine.JPG
    Engine.JPG
    60.7 KB
  • FieldHypeR.JPG
    FieldHypeR.JPG
    53.2 KB
  • boostgague.jpg
    boostgague.jpg
    40.8 KB
  • Chariot GT2.jpg
    Chariot GT2.jpg
    42.3 KB
brake fluid and decent pads are important or the fun ends very fast

You're right man
Brakes are not working very good on this car
Even with Dot4 fluid and better brake pads the car is not stopping well

I always wanna find a larger disc and calipers from other Mitisubishi that can fit right on my car
Do you know if there is any such option out there?

Thanks!
 

Latest posts

Back
Top