brisvr4
Member
Ok, it's on again people!
Who is in this time :thumbsup:
Who is in this time :thumbsup:
Willowbank - CANCELED!!!
- Thread starter brisvr4
- Start date
Help Support 4GTuner:
Turbo nutter
Well-Known Member
Sorry I didn't make it last time Tim but will let you no closer to the date this time if i'm comin. By the way well done on you new pb thats really flying for a stock bottomend! My cars sitting down on compton rd at the moment hopefully she's good to go tomorrow.
GVR40
Passion Fingers
i'm in for sure tim.
crossam
Well-Known Member
thats the day i get back from my honeymoon.
so i cant see it happening
so i cant see it happening
rob323
Don't drive it, RALLY it!
Should be in, but too early to tell.
brisvr4
Member
Just don't get the bloody flu this time!
rob323
Don't drive it, RALLY it!
I didn't intend on getting it last time <_<
brisvr4
Member
Ok so who is in this trip people.... don't leave me being the only one flying the VR4 flag out there again! 
rob323
Don't drive it, RALLY it!
Fug it, I'll be out bush again next weekend
GVR40
Passion Fingers
i will be coming, as long as i can get the brakes bled, the rear suspension in, the tie rod ends changed, and 1 ball joint changed, and maybe an oil change...
brisvr4
Member
Well you had better get working fella! Should have done all that before you went taking it on a mountain run!! Safety first!
GVR40
Passion Fingers
the suspension was fine, just changing it for my coilovers, tie rod ends were fine until we changed the hubs...ball joint not doing so well, seems that it has come out of it's taper as the nut is just spinning, not tightening. bleeding the brakes will be easy...15 minutes max
brisvr4
Member
Well off ya go outside then!
GVR40
Passion Fingers
can the ball joints be replace? i'm looking in the manual and can't seem to find it...
brisvr4
Member
Not 100% certain on that one...
Here, have a read http://www.galantvr4.org/ubbthreads/showflat.php?Cat=&Board=UBB11&Number=820083&Forum=,All_Forums,&Words=%2Bball%20%2Bjoint&Searchpage=6&Limit=25&Main=188607&Search=true&where=bodysub&Name=&daterange=1&newerval=&newertype=&olderval=&oldertype=&bodyprev=#Post820083
Here, have a read http://www.galantvr4.org/ubbthreads/showflat.php?Cat=&Board=UBB11&Number=820083&Forum=,All_Forums,&Words=%2Bball%20%2Bjoint&Searchpage=6&Limit=25&Main=188607&Search=true&where=bodysub&Name=&daterange=1&newerval=&newertype=&olderval=&oldertype=&bodyprev=#Post820083
I was gonna offer to help until I saw "ball joint" LOL :lol:
Horrible things those in our cars.
I remember doing them in the GSR - Marek heated the whole control arm with his big sparky soldering torch while I tried putting the frozen ball joints in lol. It didn't go to plan.. :unsure:
Actually I was gonna text you tonight Craig to see how you were doing with the car.
I should be free this Saturday!
Can I come as a passenger with you Tim/Craig?
Might try to drag a friend or two out as well.
I haven't seen you in ages Tim, not to mention the rest of the T4G QLD crew.
We've really gotta sort out this QLD get together really soon....*looks at Zoidy* <_<
EDIT: Craig give Johno a call, he has a good technique for separating the hub from the ball joint.
P.S - You really (!) need to perform an oil change! Can't believe you've been driving around with that crap in there for so long... :unsure:
Horrible things those in our cars.
I remember doing them in the GSR - Marek heated the whole control arm with his big sparky soldering torch while I tried putting the frozen ball joints in lol. It didn't go to plan.. :unsure:
Actually I was gonna text you tonight Craig to see how you were doing with the car.
I should be free this Saturday!
Can I come as a passenger with you Tim/Craig?
Might try to drag a friend or two out as well.
I haven't seen you in ages Tim, not to mention the rest of the T4G QLD crew.
We've really gotta sort out this QLD get together really soon....*looks at Zoidy* <_<
EDIT: Craig give Johno a call, he has a good technique for separating the hub from the ball joint.
P.S - You really (!) need to perform an oil change! Can't believe you've been driving around with that crap in there for so long... :unsure:
brisvr4
Member
YOu might have to hitch a ride with Craig Mo as I have a mate in my other seat and I don't have a rear seat anymore!
It would be great to catch up with you again too mate
It's been ages!!
It would be great to catch up with you again too mate
It's been ages!!
brisvr4
Member
Hey Mo, why don't you ask Marek and Pieter what they are doing and if they want to come out too?
JETGSR
CAPTAIN BURRITO!
your addicted!
Well I guess you know I'm working! duh. So i won't be there.
Crag the ball joint isn't stuffed just because it spins it just means that the tape isn't catching in the stub axel. must be the right one as the left one felt fine when i took the stub off!
If it is stuffed, remember i have a 20 tonne press, but you can take the control arm out!
Well I guess you know I'm working! duh. So i won't be there.
Crag the ball joint isn't stuffed just because it spins it just means that the tape isn't catching in the stub axel. must be the right one as the left one felt fine when i took the stub off!
If it is stuffed, remember i have a 20 tonne press, but you can take the control arm out!
