Feedback Needed!

[Mr Gears]

Make some bigger, stronger driveshafts.
Can you make a boost controller like this for under $100 ?

How about a flywheel like this for less than $500 ?

HKS copy camshafts would sell well for around $300 ea

Titanium lug nuts?

 

[JSTYLE]

Cradle for 2 walbro pumps: Ill suggest this to the boss, it is a really good idea and i like it.. ill see if we can put it into production and use my car and some other nissan's as a test.. will get back to you.

Oil pump: This maybe abit difficult and costly.. maybe a cast item would be the better way of going for this.

Boost controllers: with heaps of boost controllers on the market now adays i dont think the boss will want to make these but ill put forward the suggestions.

Flywheels: if there is definately a market for flywheels i will speak to the boss, im sure he wouldnt mind making some if say there was 10 ordered in a group buy or something and the price, id say will be much lesser the the fidanza's.

Driveshafts: already spoke to him about making billet shafts for the EVO/GSR lancers.. he didnt want to make them cos they take time and effort in getting them heat treated etc....

Keep the suggestions coming!

Jon

 

[-GLI-747-]

Sounds like your boss doesn't want to bother with anything that might be a challenge!

 

[EVO-00X]

Oil pump: This maybe abit difficult and costly.. maybe a cast item would be the better way of going for this. Jon

Yeah that was one from the left field :lol:

The twin Walbro intanks would be great if it works out :wink: here's a pic from a US site from a while back showing 2 x Walbros in a cradle, junction block and -10AN fitting. I cant remember who it was but it was supposedly on the cards a while ago but never eventuated by the looks of it?? :roll: I saved the pic as I thought it was a great idea myself and was going to investigate it further but the ball's in your court now

 

[JSTYLE]

]Sounds like your boss doesn't want to bother with anything that might be a challenge!

Its not that, the cost of making a 'one off' part is very expensive.. if i was to say get 10 people interested then ofcourse i can get it done and obviously cheaper then a once off price.

Re: walbro's

Thats a nice looking pic.. ill pass it onto my boss.

Jon

 

[EVOLANCER]

Aluminium Spark Plug cover would be nice

 

[Richard]

How about a nice shiny oil cap to go with:

 

[matress]

an oil cap that doesn't cost your left nut would be nice too...

i like the idea of the spark plug cover, but i dont like the flat one like the one in the picture... the one rockit had would look awesome!

 

[JSTYLE]

you can already buy those billet oil caps!

how much would you guys be willing to pay for the twin cradle walbro's (bolt in) including the pumps? Im just guaging an interest.. from my guestimations we are looking at around ~$800 setup.

Id also need about 5 people interested to even consider going ahead with the project!

The attatcjed picture is of our twin 023 setup in a 5 litre tank.. which would make this fuel setup capable of holding around 1200hp.

Jon

 

[Entaran]

I'll put my name down for a twin walbro cradle in the stock tank. Rather than going to a race fuel cell.

 

[CLuTZ]

I'll put my name down for a twin walbro cradle in the stock tank. Rather than going to a race fuel cell.

What do you need 2 pumps for lorrie??

 

[Entaran]

I'll put my name down for a twin walbro cradle in the stock tank. Rather than going to a race fuel cell.

What do you need 2 pumps for lorrie??

Because i'm going to outflow one.

Simple enough?

 

[EVO-00X]

You know where I'm coming from, I'm up for the twin in-tank cradle myself to suit EVO/GSR fuel tanks (non fuel cell) .

 

[EVO-00X]

Jon - you know what I'm gonna ask you dude Have the cradles for the twin Walbro pumps been made yet because I am seriously after one or else I may have to make one up myself :lol: