Looking for a 4G63 to rebuild.

4GTuner

Help Support 4GTuner:

MC Motorsport Sprintkhana was on Monday. Disappointing for the organisers with only about 16 cars, but still a great event with the usual diehards going nuts for it. 15 timed stages ranging from a 400m slalom (stupid ******* X turning circle) to an all out power 6km sprint. Car is good, 3port BCS and a tune from AllStar seems to have smoothed out the boost spikes and surging, and tuned down to 19.5/20psi ready for Targa.

One of the videos starts while I'm waiting for a run so you can get an eyeful of Bruce's gazillion horsepower Nissan. Lucky he did lots of wrong ways!

https://youtu.be/02EDBH5UKSM

https://youtu.be/4z0hyxMKyro

So few people showed up, we even placed in equal 2nd.

ImageUploadedByTapatalk1430186919.849577.jpg
 
Geo&Kez said:
Post this on evo oz but figured some here might be interested. The design is from this auto speed article:
http://www.autospeed.com/cms/article.html?&title=Worlds-Best-Intercooler-Water-Spray-Part-1&A=113191

End result is this:

https://youtu.be/QO6IxygqKQA

Will do some charge temp comparisons when it's out next.
Seriously cool!
Looks like a pretty affordable mod too! You can get the pumps for about ~$40 on ebay from Australian sellers, or less if you buy from the UK
 
You could near on use that pump as a water/meth pump.
will be looking around next junk day for sure.

you have different sprayers geo and poly air hosing? Dont those sprayers drip and empty the pipe? No biggie i suppose
 
Nah, hole is too small. Only like 0.4mm hole. I'm still looking for smaller, I hear there are 0.1mm ones around.
 
Small holes are good, stops the juice dripping out.

Pumps (x2 got a spare) cost me $60 2nd hand from local coffee repair place on scabs rd. Easily do meth injection, I tested this pump to 300+ psi on a closed head. $87 for the spray kit with 8 nozzles, 6m of pipe and enough connectors to make two systems. Might make **** difference, but has to be better than the stock ****.
 
Back
Top