Looking for a 4G63 to rebuild.

[evo-gsr]

Shit ^

 

[GeoKez]

Zero respect for you pricks.....

Finished the truck last weekend. Goes good. Needs some exhaust work down the line to free it up some. All the factory bits work and no engine light. Bum dyno says about 40-50hp and lots more torques. All up cost was just over $1500 due to having to machine my old block.

 

[4piknup]

Im sure there is a 1/4 mile timer app available. Do a before and after and calculate the power gain from that.
bit late now I know.

that water pipe looks ok.

Nice work there mate

 

[DOUGMO]

nice one george

 

[GeoKez]

That spit above was supposed to read "No respect FROM you pricks", youse all know I have the utmost respect for all on the forum.

The good bit on that water pipe is hidden Jack, sadly it's a two piece. I have a mock up one I used to plan with which lives in the car, and I hope one day to find something obscure on the shelf to replace it with. Be interesting to know the figures, but bum tells me it was well worth it. It'll get a spin in the sand next weekend and that'll tell me all I need to know.

Thanks George, something different.

Rd4 rallysprint video below. Getting a bit quicker, more confidence in the braking distances and carrying a little more corner speed. The setup still needs work, can't exit corners quick as I only have one rear wheel on the ground most of the time.
http://youtu.be/AhZe_8l6YYw

This is a video of my wife getting some instruction on the finer details of Barbagallo thanks to a great day put on by WAMS.
http://youtu.be/JGDdTnUwR0k

 

[DOUGMO]

that leg cocking is killing you

 

[4piknup]

Sounds like a train pullling into the station.

So is the leg cocking mean too soft on sway bar at the front?

 

[GeoKez]

Yep. About 3 seconds to find on that course if I get the setup right (or get the right person to do the setup). Annoying not having that skill set.

Yes Jack, Project MU makes any car sound like a race car!

 

[4piknup]

Why didnt you put the complete 3.8 engine in the paj?

 

[GeoKez]

Why didnt you put the complete 3.8 engine in the paj?

Different block casting. Engine mounts need modding, front ancillary plate didn't bolt up, oil pump housing (that makes the part the sump bolts to) was wrong shape, oil filter housing is on the wrong side. Heaps of reasons actually. Everything you read say's the '75 block will fit the Gen3's, but I found out that's only true for the '75's not out of 380's. Or it might be a different story for the gen 2's (NK-NL)

Turns out alright but, get to give it new bearings and rings, fresh bore, new head gaskets etc... Plenty of meat on the '74 blocks to go 2mm oversize. Having started to give it some curry, the cam profile in the 380's and the heads are really nice, loves some rev's.

 

[evo-gsr]

Jacks dog likes curry...hey Jack?

 

[4piknup]

Maybe.
Doesnt like asparagus or lime peel.
strange dog.

 

[evo-gsr]

Who does like asparagus.....thats shit.

 

[BMGTZ]

try peanut butter on your dick Jack...while i was walking past at the Motorplex I over heard george saying to some very strange looking men in long trench coats .... it works for all dogs

 

[4piknup]

Are you saying if I put peanut butter on my dick, the dog will eat asparagus.
Thats funny.
The coat men must have been asparagus farmers. With hungry dogs.

brussel sprouts are shit. Originally grown as pig food and people started eating them in the depression. I would have starved rather than eat them. With or without penut butter on them or on my cock or wherever

 

[evo-gsr]

Twisted people over west...Im telling you.

 

[GeoKez]

Your telling me Jamo! Who the fuck are these people!! Everyone knows it's honey you dip you're dick in.

 

[4piknup]

Knew a girl called honey.

 

[BMGTZ]

did she have a dog?

 

[GeoKez]

She had a cat I think, it was the one off my truck.