Manual steering rack and radiator

[4piknup]

Hi,
What cc lancers had manual racks or what fits to delete the power steering?

Also, what radiator will fit inside the metal frame of the radiator support?
Or will a gt35r fit on a 6bolt in a cc lancer without fans.

The ute radiator is shagged, so I have to buy another anyway, the 4" dump on the turbo is predicted to require a alternator relocated, so no aircon, hence the radiator can go in the spot of the aircon if required.
Cheers

 

[ONPSI]

4" dump that's massive! Is that the size your making or its already come with the turbo? Lobster back your dump

 

[4piknup]

It's already made and fits the block and ceramic coated and all.
I haven't dummied it up yet or anything, just chasing what others have done.
I could redo it in 3.5" if required and lobsterback it. I think a vband would need less room than a 4 bolt setup too.

 

[ONPSI]

Yeah your right I'm running 3.5" dump with vband and lobster back and I have no issues with room

 

[4piknup]

Although, if you use the formulae by Mr Visard the results are that a 4" pipe will be restrictive above 650hp and flows 1445cfm, 3.5"@500hp, and 3"@370hp.

Hang on, I don't really want to start discussing exhaust flow. Maybe 4" is too big,
Look here:
http://forums.evolutionm.net/evo-engine-turbo-drivetrain/313811-quest-more-power-3-exhaust-vs-3-5-exhaust.html
They got 650 on 3" and similar on 3.5". Which is what a lot of you are going to say I'm sure. Maybe bizarre figures are for na engines, I don't know.

 

[ONPSI]

Haha unless your building a pro car 3-3.5" is more then enough

 

[DOUGMO]

imo if your going over about 330kw@wheels a 3" is loosing you some power, it will still make more but with a 3.5 or 4" you
will get "free" power



I'm going to run a 3.5" system on mine.......any one know where to get thin wall 3.5" stainless? 1 or 1.2mm wall thickness?

 

[Legume]

I'm going to run a 3.5" system on mine.......any one know where to get thin wall 3.5" stainless? 1 or 1.2mm wall thickness?

Is this any good?
http://www.geordi.com.au/Products55d.htm

What cc lancers had manual racks or what fits to delete the power steering?

I guess you are wanting to delete the power steering for extra engine bay room. If there is room under the dash/column you can mount an electric power steering.

 

[khubner1]

cc gl lancer coupe had rack an pinion (no powers teering)

 

[DOUGMO]

Is this any good?
http://www.geordi.co...Products55d.htm




I guess you are wanting to delete the power steering for extra engine bay room. If there is room under the dash/column you can mount an electric power steering.

Geordie only carry 1.6mm wall, thats where I buy all of my bends and tube normally.

 

[4piknup]

cc gl lancer coupe had rack an pinion (no powers teering)

Thankyou. Will keep my eyes open.

The geordie link is a good one, good prices too. I bookmarked it for sure
#18 and #20 seem to be not made in large sizes.

 

[4piknup]

I'm going to run a 3.5" system on mine.......any one know where to get thin wall 3.5" stainless? 1 or 1.2mm wall thickness?

Here is some .4 and .5mm. Just put the seam at the top

 

[evo-gsr]

An MR2 radiator fits under/inside the radiator support...two of my mates have done this to their cars but had to do some modification to the water pipes to make it work.

 

[Gianni]

Kinda on topic. I'm making a 3" dump and worried it'll hit the oil filter. Should it be alright or do I just relocate the filter

 

[evo-gsr]

I have a 3" dump on one of my cars..doesn't hit oil filter but its close...

 

[Gianni]

Which filter are u using. I have the longer filter, but there is a shorter one that fits on aswel?

 

[4piknup]

An MR2 radiator fits under/inside the radiator support...two of my mates have done this to their cars but had to do some modification to the water pipes to make it work.

Ok, cheers. I see the outlets are different as you say. Somewhere to start anyway.

Btw, my 3" dump is so close it scratches a thread line on the side of the filter as it goes on. That's another reason I haven't wound boost up as I don't want to cook a hole in the filter

 

[evo-gsr]

Which filter are u using. I have the longer filter, but there is a shorter one that fits on aswel?

Z411

 

[khubner1]

jack filter felction kit is needed in your case!

 

[4piknup]

Yea I know. It's in the box of goodies to go on. Though I decided to get a relocation kit not a felctiion kit. Lol