Parts in Canada

[efertsman]

Looking for quite a few parts for this Evolution 1 Ive got.
Wondering if there are any Canadians on the site whom have successfully purchased parts from somewhere.... and where?
Specifically looking at clutch kits, Fork and pivot ball...

Worried since apparently some UK sites wont ship anything out here.

 

[ONPSI]

I've got a super single clutch fresh rebuilt had only done maybe 1000kms before i took it out..could be expensive to send though

 

[brisvr4]

Try jnztuning for factory parts. Extremepsi or maperformance for aftermarket stuff (clutches etc)

 

[boostboy76]

No American suppliers that will ship to Canada?

Or are they completely unaware of early model Evos?

 

[evo-gsr]

+1 to maperformance.com...........they have awesome stuff usually at good prices too

surely they will ship it up to you??

 

[efertsman]

Thanks for the reply s

Been doing alot of research for the past two weeks, seem to have found everything i need except for the fork. Cant find a part number for starters.
Ive got access to parts for 90-98 DSMs, but a part number is needed.
It would be easy if the CD9A tranny was the same as a DSM... Then this wouldnt be a issue.

 

[efertsman]

http://www.meek.com.au/index.php?act=viewProd&productId=121

Heres the Fork,
Price is crazy to be honest...
anyone have a OEM product numberÉ?

 

[efertsman]

http://www.evo123.net/showthread.php?t=1219&page=3

MD770506 ... i think :blink:

 

[brisvr4]

Come on mate, try to work with us here!
ExtremePsi oem fork.
We gave you decent contacts over there, use them! lol

 

[efertsman]

Come on mate, try to work with us here!
ExtremePsi oem fork.
We gave you decent contacts over there, use them! lol

Awsome! Just ordered it.
You guys know if the clutches from 2nd Gen DSMs will work in the EVO?
IF the fork is the same, i suspect the clutch would work?

 

[brisvr4]

Anything that is listed over there as being for a 90 - 99 will work mate. Just make sure that if you buy a new flywheel that it should be a 7 bolt not a 6.

 

[jay777]

Where are you located in Canada?

I have a very reputable contact who can likely get you anything your looking for given it's compatible with 90-99 DSMs (i.e. clutches, flywheels, engine parts, etc)

 

[evo-gsr]

Where are you located in Canada?

I have a very reputable contact who can likely get you anything your looking for given it's compatible with 90-99 DSMs (i.e. clutches, flywheels, engine parts, etc)

If you click on his username all shall be revealled!!!!
Such as......

Location: Halifax, Nova Scotia

 

[jay777]

If you click on his username all shall be revealled!!!!
Such as......

Location: Halifax, Nova Scotia

Thanks, I'm still trying to adapt to this forum layout

 

[efertsman]

Where are you located in Canada?

I have a very reputable contact who can likely get you anything your looking for given it's compatible with 90-99 DSMs (i.e. clutches, flywheels, engine parts, etc)

HAHA,
Have not checked back in a couple days... sorry

whats this contact of yours?
I did end up buying an OEM exedy Clutch, Fork and Prvot ball from ExtremePSI.com
it was 270 bucks shipped.
BUT... for future references!

 

[Evogargoyle]

Thanks for the reply s

Been doing alot of research for the past two weeks, seem to have found everything i need except for the fork. Cant find a part number for starters.
Ive got access to parts for 90-98 DSMs, but a part number is needed.
It would be easy if the CD9A tranny was the same as a DSM... Then this wouldnt be a issue.

The 96 talon has the same starter,alternator,water pump and belts as the evo 1. Map performance is a great seller for lots of parts. Slowboy racing is also great and they both have very good tech support.

 

[efertsman]

The 96 talon has the same starter,alternator,water pump and belts as the evo 1. Map performance is a great seller for lots of parts. Slowboy racing is also great and they both have very good tech support.

Cool, ill check those out.
The thing with american suppliers is they always sent via UPS, then UPS rapes you at the door when they ask for their 50% brokerage fee!

 

[SIVART]

Ive sent a few things over to Canada , the worst bit is always the Freight , the last thing I sent to the USA California was $240 just in freight and that was economy , where express was about $485 , it was a large item but very light

the last bit I sent to Canada was some bushes , and I was quoted $90 for freight but it ended up being about $55-$65 , so I sent some money back the client