RVR Hsg Dyno result

[vr401]

My friend took his RVR to dyno today.
Car is Manual HSG RVR. Stock exhaust, wallbro pump, 560cc injectors, pod filter and we wrote a custom chip for it. Running 18psi of boost it made 146kw.

 

[to4garret]

needs an exhaust! 3" mandrel minimum. should have been closer to 170/180kw with those mods otherwise.

 

[mannynz]

Yes, get 3" exhaust.
Mine did 155Kw on purely 3" exhaust mod. That was with stock injectors, filter, ecu, td04.

 

[vr401]

Yes, get 3" exhaust.
Mine did 155Kw on purely 3" exhaust mod. That was with stock injectors, filter, ecu, td04.

That's what i keep telling him. He should get one soon.

 

[MattL]

Just go 3" entire system running a highflow cat and no mufflers, It'll sound great

 

[trist]

Just go 3" entire system running a highflow cat and no mufflers, It'll sound great

thats what i have its blody loud

 

[brettu26]

i have very similiar and yes, it is VERY loud. but awesome

 

[milkandoj]

You could still run the large oval strait through mufflers halfway down the system, that way not restriction and a deeper note. Along with whatever you choose in the rear.
Or some resonators along the way as well.

 

[Astron Boy]

all that's on my wagon is a magnaflow 3" oval.
98db@3000rpm.
meanwhile, my 4g63 is a sohc, they are slightly more larey IMO.

 

[SquattingDog]

What the hell? You guys don't have noise limits? We have to be under 89dB (which I don't think even my 3" is with no cat, one reso, one muffler...)

 

[mrcyborg]

should get piles more power out of this setup with an exhuast. i run a evo engine with HSG turbo setup on it. k and n pod filter, standard intake evo cooler and pipe work, full 3 inch exhuast with two big oval muffs very quiet. i run it off a 4g61t ecu with a emanage to alter the maf signal only and i made 190kw at all four on 18psi.

 

[trist]

What the hell? You guys don't have noise limits? We have to be under 89dB (which I don't think even my 3" is with no cat, one reso, one muffler...)

yes we do but thats why i have a muffler and pea shooter pipe for the epa test

 

[dj_konix]

with a massive crack in my manifold and untuned i got 175kw today not bad at all

 

[something_wild]

So judging on what you guys have said, my HSG with 3" exhaust inc. metalcat and pod filter 'should' be around the 150-155awkw mark?
Feels dam quick on the road for those mods alon, and it's a very healthy motor (75000km)....so i shouldn't be supprised with those kind of numbers??

Oh, and mine is f'ing loud!! Dam rear cannon

 

[to4garret]

i just did a G-Tech power run and scored 117wkw! SSG stock as a rock auto!

 

[vr401]

i just did a G-Tech power run and scored 117wkw! SSG stock as a rock auto!

Is that late or early model G tech? What weight you set for the car?

 

[to4garret]

Is that late or early model G tech? What weight you set for the car?

hahahaha, it was actually "dynolicious" on the iphone with a proper window mount. same principal as a G-Tech.

you could almost argue that the iphone has a better more refined G-Sensor.

i have done a few cars with it now and it is fairly accurate if you do the tests correctly.

ran a 15.5 btw :wub:

 

[to4garret]

here is the print out,

 

[to4garret]

oh yea, i had the weight set at 1600kg as a very rough estimate. will weight it properly over the weekend.

 

[bazeng]

Craig,

Cool software!!!
140km/h on a private airstrip/road I'm assuming!!!