siemens wiring diagrams

[4piknup]

as title says, i chasing a siemens wiring diagram for my jumbuck. in particular the pin outs for the plugs that join the engine loom to the body loom. ie 3 plugs next to the ecu (1 plug is for alarm so that one is ok). or if you know if its the body loom is the same from siemens to mitsi.
really, is there any issues at this point when changing from siemens ecu/loom to mitsi ecu/loom. other than the reverse light wires change.

dont tell me to look on evocoupe cause that guide by evooox has gone, there was also another one there as well but that is gone too.
also cant find anything on gti forums despite plenty of posts saying otherwise.
some parts of wiring on neils yahoo group but missing heaps of pages and most is mitsi ecu not siemens.
have even looked on ebay for wiring manual.

anyone done this? siemens to mitsi engine loom change? any issues?
i know about alt wiring extension, reverse wiring,
dont quite have handle on thermo fan, plug under afm changes. any clues

 

[CYBORG-X]

i sent ya an email, but i think i forgot to say, yes it all plugs in, to be honnest i think the car even starts and runs with out the 6 pin plug connected and the switch in the radiator goes directly to the fusebox relay, and the ecu piggybacks off that

 

[sgtlover]

I have the manual about how to install it from evo coupe by exo x if u want it.. also could any of u send me that ecu diagram as well to [email protected].. Im doing the conversion to my 95 4g91 lancer but for some reason the wires for the fuel relay don't seem to match the gti mitsu ecu so any help u can offer i would be appreciated.

 

[4piknup]

pmed cyborg to give you my email address as i not received it. (or cant remember the log in)

pmed sgtlover with email address for guide. what wiring do you want

cheers all

 

[sgtlover]

pmed cyborg to give you my email address as i not received it. (or cant remember the log in)

pmed sgtlover with email address for guide. what wiring do you want

cheers all

the ecu wiring for the proton gti and any other gti related diagrams u might have .. [email protected]

 

[4piknup]

emailed link fer what i have, but it is jummy siemens. i have siemens loom removed if you need pics of any plugs or whatever

 

[LWNSLW]

Pm vk2kyg on this board he has a 93t jumbuck and has been through all the problems he may be able to help you. His name is Neil...

 

[4piknup]

yea he has some of the diagrams but they are incomplete. i think i have pieced it together from what i have tho. cheers