Recaro SR3 seat Part Number

ULS33-RVR-GO · Mar 17, 2014

Hey guys,
I'm currently restoring my E3 Recaro SR3 seats. So far I've already replaced the side bolsters which came up great and feels quite snug when strapped in.
I'm at the stage where I'm now replacing the backrest foam (drivers side) and have purchased what I was led to believe a SR3 backrest from Capital Seating in the UK.

Note that the original foam has a slightly pointier shoulder supports compared to the SR2?? foam. This is where my problem lies.

Almost immediately I noticed the backrest foam wasn't the correct foam for the SR3 (even though their site mentions they have these for 1995 Mitsubishi Evo III)
Upon liaising with the guys at Capital Seating. They have informed me that i need to supply a Recaro seat number (apparently on the underside somewhere) To which I cannot find on either front seats anywhere.

I require this number as Capital Seating need it so they can attain the correct backrest foam from Recaro in Germany. I'm all out of ideas and was wondering if anyone can shed some light for me.

Cheers

JDMEvo · Mar 18, 2014

From epc
http://japancars.ru/index.php?route=catalog/mitsubishi&grp_id=53&area=M00&cat=A0168006A&mdl=CE9A&clf=SNGF&cfg_id=1&blk_id=010

4piknup · Mar 18, 2014

JDMEvo said:
From epc
http://japancars.ru/index.php?route=catalog/mitsubishi&grp_id=53&area=M00&cat=A0168006A&mdl=CE9A&clf=SNGF&cfg_id=1&blk_id=010

Gotta click the tabs above the drawing. Tab 2 &4 are recaro rh & lh

Missile · Mar 18, 2014

Problem is that will be the Mitsubishi part number, Capital Seating will need the Recaro number.
I know the part number for the rails; probably wont help you.

ULS33-RVR-GO · Mar 18, 2014

Cheers for the diagram. Missile is right though. I'll need the recaro part number to get this sorted. Anywhere else that may display what i'm after?

ULS33-RVR-GO · Mar 18, 2014

The only thing i can see that resembles a part number are the rails. Unfortunately capital seating can't do anything with it.
I would've thought Recaro could search by vehicle specs.....

evo-gsr · Mar 18, 2014

They just want you to do all the legwork!

ULS33-RVR-GO · Mar 19, 2014

Quote "[SIZE=11pt]Our sales manager has been in contact with Germany and they say they require the part number from your seat to establish exactly which seat it is then they believe they will be able to supply a parts explosion from[/SIZE]
[SIZE=11pt]there on. And to see if the foam is available to the aftermarket."[/SIZE]

evo-gsr said:
They just want you to do all the legwork!

[SIZE=11pt]^^Yep! They certainly do. I really can't see how hard it is

I just hope it helps many SR3 owners out there once the right backrest is found.[/SIZE]

This label is found underneath the seat/bum foam towards the front. Twas my first guess to provide Capital Seating but with no avail.

khubner1 · Mar 19, 2014

what about on the sewn in adr label found towards the back on the base. mine are sr1's found in evo1 so maybe completly different

Missile · Mar 19, 2014

See if there is a part number on the inside of the recliner cover - thats where there appears to be some embossed text on other models.

Missile · Mar 19, 2014

Or on the outside of it even.

ULS33-RVR-GO · Mar 19, 2014

I'll double check those spots tonight. Thanks for the suggestions.
Khubner1, i don't think the SR3's have ADR labels....well mine don't anyways.

evo-gsr · Mar 20, 2014

Never seen an ADR number on any of my numerous Recaros.

ULS33-RVR-GO · Mar 23, 2014

I found these for sale on Ebay and noticed that one seat displayed the Part number i think i require.

It's from another vehicle other than Evo lll but i still believe it could provide me with the right info so i can pass it onto Capital Seating/Recaro Germany

Ebay seat

Evo lll seats - Pic just for comparison to above

Does anybody else have genuine SR3 seats and are able to double check to see if their seat(s) display that same label?

ULS33-RVR-GO · Mar 23, 2014

Oh and my last resort may be to contact Keiper (shown on the Label). Who supply Recaro their foam products...
http://www.johnsoncontrols.com/content/us/en/products/automotive_experience/seating/seat-foam.html

EVO-00X · Mar 24, 2014

I saved some pics of a genuine yellow EVO 3 GSR a while back on Carsales. It had a chassis number in it that works in Mitsubishi ASA parts finder.
When I enter the chassis number it gives me all the part numbers that were associated with that car, interior, accessories, engine etc.
Hope this pic I put together helps you.

ULS33-RVR-GO · Mar 24, 2014

Thanks for the pic EVO-00X. I've sent it through to the guys in the UK. Anything is better than nothing right?

Fingers crossed this point them in the right direction.

I emailed the guys at IdealSeat.com.au (Australian Recaro importer) and this is what he had to say.

"Unfortunately the moulded foams are no longer available for your seat. However, my suggestion would be to take the foams you have received from the UK to a motor trimmer and get them to pad out the shoulder areas to suit your seat. The seats you have are in fact SR2 / SRD or an old Sport and due to their age RECARO no longer make the foams. Whilst we are carry replacement foams here in stock in Melbourne, we only have the same foam."

I don't remember Evo lll's having SR2 seats. Me thinks he's still got his wires crossed. I did however ponder the idea of getting some latex foam and an electric cutting knife to 'sculpt' the so-called pads and give it the extra foam needed....

evo-gsr · Mar 24, 2014

That black seats Recaro label at the top of the headrest, looks like it was stitched on by a blind bloke.

ULS33-RVR-GO · Mar 24, 2014

evo-gsr said:
That black seats Recaro label at the top of the headrest, looks like it was stitched on by a blind bloke.

Haha, i saw that too. Wtf were quality control thinking?

4piknup · Mar 24, 2014

Latex foam eh. I tried a heap of foams. Settled on a cut down swim noodle. It is good and hard for the edges

Recaro SR3 seat Part Number

Help Support 4GTuner:

Member

Active Member

master of none

Member No. 00004

Member

Member

Well-Known Member

Member

Moderator

Member No. 00004

Member No. 00004

Member

Well-Known Member

Member

Member

4G63T AWD CC COUPE

Attachments

Member

Well-Known Member

Member

master of none

Similar threads