Digital display units
- Thread starter OFFON-4
- Start date
Help Support 4GTuner:
Nah.... way to rich for me Steve, just need something around the 1000-1500 mark or else im going to slam in 2 autometer gauges .
I know the Motec sport Dash retails $2200 so yeah looking for a cheapy to wack in...
So expensive these bloody things, i saw a motec sport dash for sale a while back $1300 but it was gone in a matter of seconds lol
I know the Motec sport Dash retails $2200 so yeah looking for a cheapy to wack in...
So expensive these bloody things, i saw a motec sport dash for sale a while back $1300 but it was gone in a matter of seconds lol
Yeah, the SDLs are totally different to the ADLs, still bloody good though.
AIM sell a version of the MXL (the Strada) in that price range, and it's a pretty good bit of kit. Haltech rebadge and sell them, so APC might be familiar with them (they're a haltech dealer aren't they?) .. they take a CAN input, so should work with your motec. The cheap version doesn't have logging though, so you have to go to the Pista version if you want that.
http://www.aimsportsystems.com.au/mxl_system.html
AIM also do the Mychron 3 which is cheaper again I think, but nowhere near as pretty haha.
http://www.aimsportsystems.com.au/mychron3.html
The other one to look at is the Racepak IQ3. If you want logging, I'd go for this over the MXL Pista. Might be a little bit more than your budget at ~$1450 USD (I've not seen an AU price for them yet), but they've probably got more features than the Motec SDL. I'm probably going to end up with one of these in my car when Haltech release them here for the E8.
http://www.racepak.com/Components/IQ3.php
AIM sell a version of the MXL (the Strada) in that price range, and it's a pretty good bit of kit. Haltech rebadge and sell them, so APC might be familiar with them (they're a haltech dealer aren't they?) .. they take a CAN input, so should work with your motec. The cheap version doesn't have logging though, so you have to go to the Pista version if you want that.
http://www.aimsportsystems.com.au/mxl_system.html
AIM also do the Mychron 3 which is cheaper again I think, but nowhere near as pretty haha.
http://www.aimsportsystems.com.au/mychron3.html
The other one to look at is the Racepak IQ3. If you want logging, I'd go for this over the MXL Pista. Might be a little bit more than your budget at ~$1450 USD (I've not seen an AU price for them yet), but they've probably got more features than the Motec SDL. I'm probably going to end up with one of these in my car when Haltech release them here for the E8.
http://www.racepak.com/Components/IQ3.php
The software the motec dash comes with (even the SDL) for log analysis is absolutely awesome, better than anything I've seen elsewhere. I'd love to have $20k just to blow on motec hardware 
edit: Racepak does do a cheaper version of the IQ3 for display - https://www.g35garage.com/ec/Product.aspx?ID=10514 .. no logging though. If you're only gonna be drag racing the car, and not logging inputs from a heap of sensors, maybe you could just use the internal ecu memory (I forget which one you have) for logging and get away with the cheaper dash?
edit: Racepak does do a cheaper version of the IQ3 for display - https://www.g35garage.com/ec/Product.aspx?ID=10514 .. no logging though. If you're only gonna be drag racing the car, and not logging inputs from a heap of sensors, maybe you could just use the internal ecu memory (I forget which one you have) for logging and get away with the cheaper dash?
Dean
Member
ExpenSIVE!!
whats the benefits of forking out so much dosh?
Cash Paid Vs. Benefit Received.
whats the benefits of forking out so much dosh?
Cash Paid Vs. Benefit Received.
steve said:The software the motec dash comes with (even the SDL) for log analysis is absolutely awesome, better than anything I've seen elsewhere. I'd love to have $20k just to blow on motec hardware
edit: Racepak does do a cheaper version of the IQ3 for display - https://www.g35garage.com/ec/Product.aspx?ID=10514 .. no logging though. If you're only gonna be drag racing the car, and not logging inputs from a heap of sensors, maybe you could just use the internal ecu memory (I forget which one you have) for logging and get away with the cheaper dash?
Im not sure these are compatable with motec units, i think APC have questioned Haltech about these, might just run it past them again.
Dean/Rich - Yeah i might just get autometer dash cheaper and does the job ill gives the Haltech/Racpak dash one more go see what happens
Yeah, I'm not sure if the IQ3 supports a CAN bus input .. if it does, it should work with a motec no problems, but if not. You could still use it, but you'd have to buy the VNET data aquisition stuff from Racepak as well, and you'd quickly find an SDL would be cheaper.
Get a DASHDAQ mate..
http://www.dashdaq.com/
It is compatible with:
0-5V Analog Sensors
Blackline FUEL 10Hz GPS
Blackline FUEL 20HzGPS
AEM Plug-N-Play EMS
AEM Universal EMS
Wolf EMS
Innovate DL-32
Innovate SSI-4
Innovate TC-4
Innovate LMA-3
Innovate ST-12
Innovate LC-1
Innovate LM-1
Zeitronix ZT-2
AEM Wideband UEGO
FAST Air/Fuel Meter
FJO Wideband
NGK Wideband Kit
PLX Wideband
Phidgets 8/8/8 USB analog in
Phidgets 0/16/16/ USB digital in
Phidgets USB K-Type Thermocouple and EGT
Emerald3D
HydraEMS Nemesis 2
FAST XFI
Autronic SMC
Autronic SM2
Autronic SM4
Haltech E6X
Haltech F10X
Haltech E6GMX
Haltech E8
Haltech E11V2
Haltech Interceptor
DTAFast S40 Pro
DTAFast S60 Pro
DTAFast S80 Pro
DTAFast S100 Pro
J1939 Heavy Duty Trucks
RS232 NMEA GPS Modules
0-5V Analog Sensors
Dynojet WBC Wideband
EMS Stinger 4
EMS 4860
EMS 6860
EMS 8860
EFI Technologies
Maybe sell the overprices motec and buy something else? Autronic SM4 for the win!!
Otherwise you can wait?
* Some add-ons will require additional hardware and/or software modules
You can ALSO ODBII this unit with stock ecus
Ariel Atom
Aston Martin
Audi
Bentley
BMW
Buick
Cadillac
Chevrolet
Chrysler
Daewoo
Dodge
Ferrari
Ford
GMC
Holden
Honda
Hummer
Hyundai
Infiniti
Isuzu
Jaguar
Jeep
Kia
Lamborghini
Land Rover Lexus
Lincoln
Lotus
Maserati
Mazda
Mercedes
Mercury
Mini
Mitsubishi
Nissan
Oldsmobile
Plymouth
Pontiac
Porsche
Rolls Royce
Roush
SAAB
Saturn
Saleen
Scion
Subaru
Suzuki
Toyota
Volvo
VW
http://www.dashdaq.com/
It is compatible with:
0-5V Analog Sensors
Blackline FUEL 10Hz GPS
Blackline FUEL 20HzGPS
AEM Plug-N-Play EMS
AEM Universal EMS
Wolf EMS
Innovate DL-32
Innovate SSI-4
Innovate TC-4
Innovate LMA-3
Innovate ST-12
Innovate LC-1
Innovate LM-1
Zeitronix ZT-2
AEM Wideband UEGO
FAST Air/Fuel Meter
FJO Wideband
NGK Wideband Kit
PLX Wideband
Phidgets 8/8/8 USB analog in
Phidgets 0/16/16/ USB digital in
Phidgets USB K-Type Thermocouple and EGT
Emerald3D
HydraEMS Nemesis 2
FAST XFI
Autronic SMC
Autronic SM2
Autronic SM4
Haltech E6X
Haltech F10X
Haltech E6GMX
Haltech E8
Haltech E11V2
Haltech Interceptor
DTAFast S40 Pro
DTAFast S60 Pro
DTAFast S80 Pro
DTAFast S100 Pro
J1939 Heavy Duty Trucks
RS232 NMEA GPS Modules
0-5V Analog Sensors
Dynojet WBC Wideband
EMS Stinger 4
EMS 4860
EMS 6860
EMS 8860
EFI Technologies
Maybe sell the overprices motec and buy something else? Autronic SM4 for the win!!
Otherwise you can wait?
Planned Support*
• MOTEC M4
• MOTEC M48
• MOTEC M400
• MOTEC M600
• MOTEC M800
• MOTEC M880
• PI Research
• Link ECU
• Additional CAN-Based devices
• USB Host Devices
• RS232 devices
• MOTEC M48
• MOTEC M400
• MOTEC M600
• MOTEC M800
• MOTEC M880
• PI Research
• Link ECU
• Additional CAN-Based devices
• USB Host Devices
• RS232 devices
* Some add-ons will require additional hardware and/or software modules
You can ALSO ODBII this unit with stock ecus
Supported Vehicles
DashDAQ supports all of the following 1996 and newer OBD2 compliant vehicles. Click on the links to see data lists.
Acura Ariel Atom
Aston Martin
Audi
Bentley
BMW
Buick
Cadillac
Chevrolet
Chrysler
Daewoo
Dodge
Ferrari
Ford
GMC
Holden
Honda
Hummer
Hyundai
Infiniti
Isuzu
Jaguar
Jeep
Kia
Lamborghini
Land Rover Lexus
Lincoln
Lotus
Maserati
Mazda
Mercedes
Mercury
Mini
Mitsubishi
Nissan
Oldsmobile
Plymouth
Pontiac
Porsche
Rolls Royce
Roush
SAAB
Saturn
Saleen
Scion
Subaru
Suzuki
Toyota
Volvo
VW
